The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the large-size AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the 4P th P -8P th P Generation AMOLEDs.
The flash sintering process has been regarded as a noble method to densify ceramic materials. The distinctive feature of the flash sintering is the reduced sintering time which is caused by the electric field. In this study, flash sintering of the hydroxyapatite bioceramics was carried out at temperatures of 900-1200°C and electric fields of 500-1200 V/cm. Dense sintered sample was prepared in a short time within 10 seconds. Electric field required for flashing became reduced as the furnace temperature increased. Abrupt rise of the sample temperature of up to 120°C was observed when the flash occurred. The incubation time for flashing became shorter with increasing temperature and electric field. The flashing was found to occur at lower temperature and lower electric field in vacuum than in air. Microstructure of the flash sintered sample was not different from that of conventionally sintered sample.
The vacuum thermal evaporation (VTE) patterning technique using linear type evaporation sources has 3μm of minimum shadow distance so that the high resolution (577ppi, 2K QHD) AMOLED can be manufactured. However, there is a shadow limitation of the neighboring patterns overlapped when manufacturing the ultra-high resolution (800ppi, 4K UHD) AMOLED. The plane source VTE shows recently of 1.1μm~1.3μm in shadow distance measurements and it verifies the possibility of manufacturing the ultra-high resolution AMOLEDs with 1000~1500ppi. The shadow angle of 83° and shadow distance of 0.37μm have been predicted from the plane source AFM analysis and, therefore, it shows high possibility of manufacturing the super-ultra-highAMOLEDs with 3300ppi. The study of plane source evaporation and its evaporator need to be expanded for the AMOLED futures.
The linear source FMM evaporation can only provide 600ppi AMOLED devices because of the shadow effect so that new concept of FMM patterning technology is needed in order to fabricate the 2250ppi AMOLEDs. Recently, the plane source FMM evaporation techniques has been developed to show a dramatically suppressed shadow effect and to measure the 0.18um of shadow distance and Hwang's mixing for the new way of EML layer process. The green color OLED device has been fabricated by the plane source evaporation to study the emission property for the first time. In addition, the fabrication process of the plane source FMM evaporator has been discussed for the 2250ppi flexible AMOLED.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.