Polymeric materials have been extensively explored in the field of nanomedicine; within them, poly lactic-co-glycolic acid (PLGA) holds a prominent position in micro- and nanotechnology due to its biocompatibility and controllable biodegradability. In this review we focus on the combination of PLGA with different inorganic nanomaterials in the form of nanocomposites to overcome the polymer’s limitations and extend its field of applications. We discuss their physicochemical properties and a variety of well-established synthesis methods for the preparation of different PLGA-based materials. Recent progress in the design and biomedical applications of PLGA-based materials are thoroughly discussed to provide a framework for future research.
A hydroxyapatite–Fe2O3 based material of marine origin – fish bones treated in Fe(ii)-containing solution – shows potential as a sunscreen filter, absorbing in UVA/UVB intervals, with no free radical formation under irradiation.
Currently, one of the main limitations in ultrathin Cu(In,Ga)Se2 (CIGS) solar cells are the optical losses, since the absorber layer is thinner than the light optical path. Hence, light management, including rear optical reflection and light trapping is needed. In this work we focus on increasing the rear optical reflection. For this, a novel structure based on having a metal interlayer in between the Mo rear contact and the rear passivation layer is presented. In total, eight different metallic interlayers are compared. For the whole series, the passivation layer is aluminum oxide (Al2O3). The interlayers are used to enhance the reflectivity of the rear contact and thereby increasing the amount of light reflected back into the absorber. In order to understand the effects of the interlayer in the solar cell performance both from optical and/or electrical point of view, optical simulations were performed together with fabrication and electrical measurements. Optical simulations results are compared with current density-voltage (J-V) behavior and external quantum efficiency (EQE) measurements. A detailed comparison between all the interlayers is done, in order to identify the material with the greatest potential to be used as rear reflective layer for ultrathin CIGS solar cells and to establish fabrication challenges. The Ti-W alloy is a promising rear reflective layer since it provides solar cells with light to power conversion efficiency values of 9.9 %, which is 2.2 % (abs) higher than the passivated ultrathin sample and 3.7 % (abs) higher than the unpassivated ultrathin reference sample.
On the importance of joint mitigation strategies for front, bulk and rear recombination in ultrathin Cu(In,Ga)Se2 solar cells. ACS Appl. Mater. Interfaces 2021, which has been published in final form at
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.