SUMMARYOften inspection and maintenance work involve a large number of highly dangerous manual operations, especially within industrial fields such as shipbuilding and construction. This paper deals with the autonomous climbing robot which uses the "caterpillar" concept to climb in complex 3D metallic-based structures. During its motion the robot generates in real-time the path and grasp planning in order to ensure stable self-support to avoid the environment obstacles, and to optimise the robot consumption during the inspection. The control and monitoring of the robot is achieved through an advanced Graphical User Interface to allow an effective and user friendly operation of the robot. The experiments confirm its advantages in executing the inspection operations.

No abstract

BackgroundNon-immersive video games are currently being used as technological rehabilitation tools for individuals with Parkinson’s disease (PD). The aim of this feasibility study was to evaluate the effectiveness of the Leap Motion Controller® (LMC) system used with serious games designed for the upper limb (UL), as well as the levels of satisfaction and compliance among patients in mild-to-moderate stages of the disease.MethodsA non-probabilistic sampling of non-consecutive cases was performed. 23 PD patients, in stages II-IV of the Hoehn & Yahr scale, were randomized into two groups: an experimental group (n = 12) who received treatment based on serious games designed by the research team using the LMC system for the UL, and a control group (n = 11) who received a specific intervention for the UL. Grip muscle strength, coordination, speed of movements, fine and gross UL dexterity, as well as satisfaction and compliance, were assessed in both groups pre-treatment and post-treatment.ResultsWithin the experimental group, significant improvements were observed in all post-treatment assessments, except for Box and Blocks test for the less affected side. Clinical improvements were observed for all assessments in the control group. Statistical intergroup analysis showed significant improvements in coordination, speed of movements and fine motor dexterity scores on the more affected side of patients in the experimental group.ConclusionsThe LMC system and the serious games designed may be a feasible rehabilitation tool for the improvement of coordination, speed of movements and fine UL dexterity in PD patients. Further studies are needed to confirm these preliminary findings.

No abstract

No abstract

The design and application of Serious Games (SG) based on the Leap Motion sensor are presented as a tool to support the rehabilitation therapies for upper limbs. Initially, the design principles and their implementation are described, focusing on improving both unilateral and bilateral manual dexterity and coordination. The design of the games has been supervised by specialized therapists. To assess the therapeutic effectiveness of the proposed system, a protocol of trials with Parkinson's patients has been defined. Evaluations of the physical condition of the participants in the study, at the beginning and at the end of the treatment, are carried out using standard tests. The specific measurements of each game give the therapist more detailed information about the patients' evolution after finishing the planned protocol. The obtained results support the fact that the set of developed video games can be combined to define different therapy protocols and that the information obtained is richer than the one obtained through current clinical metrics, serving as method of motor function assessment.

The robotics laboratory of the Universidad Carlos III of Madrid has developed the ROMA climbing robots, which are able to travel along 3D complex environments to carry out inspection tasks. The ROMA robots family is able to self‐support its locomotion system and moves in a similar way to a caterpillar. During this motion the robots generate in real‐time an optimal path and grasp planning in order to ensure a stable self‐support and avoid obstacles in the environment. In order to move the robots in a teleoperated or automatic way a man‐machine interface has been developed. The robots were developed primarily for use during the inspection of complex metallic structures. There are a large number of operations to be performed on metallic structures such as those encountered in bridges, oil rigs and building skeletons which represent a danger for human operators. Nevertheless, they are not limited to these structures due to fact that they are equipped with the necessary tools for new environments like concrete.

For complex climbing robots, which work in difficult 3D outdoor environments, the gravity force has an important influence with respect the robots changes during its motion. This type of climbing robots is self-supported in the complex 3D structures (bridges, skeleton of the buildings, etc.) which require periodic, manually performed inspections and maintenance. The use of non-conventional climbing robots for this type of operation is highly appropriate. Their locomotion system commonly comprises arms/legs that permit the robot's 3D mobility (gait). These mechanisms also enable the robot to support itself and guarantee its stability. This paper presents the main features of non-conventional climbing robots' mobility on complex 3D environments: power supply, number of DOFs, lightweight structure, gait, speed, secure grasp, etc. It also covers the general theory underlying the design of climbing robots, their kinematics, with its specific, unconventional mobility. The paper not only describes the climbing robot mobility theory but also provides several examples taken from the ROMA and MATS robots families. The developed robots have high degree of autonomy with totally on-board control system. These autonomous robots demonstrate in the course of real experimentation that the criteria for design, control strategy and path planning are accurate. Finally, the paper examines trends in climbing robot technology.