No abstract

No abstract

As a byproduct of the combustion of rice husk to generate energy, rice husk ash (RHA) is formed by silica and carbon, apart from small amounts of other constituents. Several treatments can be used to increase the purity of the silica obtained, or even produce pure silica. The present study tested the efficiency of different techniques to obtain silica, characterizing and comparing the silicas obtained from RHA. A literature review was conducted, and then selected techniques were used to produce silica, which was characterized by XRF, XRD, particle sizing, specific weight, specific surface area, total carbon, and SEM. The literature review showed that most techniques include a pretreatment like acid or alkaline leaching followed by thermal treatment to increase the amount of silica produced by reduction of carbonaceous materials. The results showed that it is possible to produce silica from RHA using simple methods, and that these produced silica with purity above 98%. The treatments that afforded the best results were acid leaching followed by thermal treatment at 800ºC, and alkaline extraction at low temperature, with silica purity of 99.3% and 99.6%, respectively.

One of the consequences of industrial food production activities is the generation of high volumes of waste, whose disposal can be problematic, since it occupies large spaces, and when poorly managed can pose environmental and health risks for the population. The rice industry is an important activity and generates large quantities of waste. The main solid wastes generated in the rice production cycle include straw, husk, ash, bran and broken rice. As such, the aim of this article is to present a review of this cycle, the waste generated and the identification of opportunities to use them. Owing to impacts that can be minimised with the application of rice husk ash as a by-product, this work is focused on the recycling of the main wastes. In order to achieve that, we performed theoretical research about the rice production cycle and its wastes. The findings point to the existence of an environmentally suitable use for all wastes from the rice production cycle. As rice, bran and broken rice have their main use in the food industry, the other wastes are highly studied in order to find solutions instead of landfilling. Straw can be used for burning or animal feeding. The husk can be used for poultry farming, composting or burning. In the case of burning, it has been used as biomass to power reactors to generate thermal or electrical energy. This process generates rice husk ash, which shows potential to be used as a by-product in many different applications, but not yet consolidated.

No abstract

Electric arc furnace dust (EAFD) is a solid waste generated in the collection of particulate material during steelmaking process in electric arc furnace. The aim of this work is to carry out a chemical and structural characterization of two EAFD samples with different Zn contents. Optical emission spectroscopy via inductively coupled plasma (ICP), X ray diffractometry (XRD) and Mössbauer spectroscopy analysis were carried out in such EAFD samples. From XRD measurements, the samples exhibits the following phases: ZnFe2O4, Fe3O4, MgFe2O4, FeCr2O4, Ca0.15Fe2.85O4, MgO, Mn3O4, SiO2 and ZnO. The phases detected by Mössbauer spectroscopy were: ZnFe2O4, Fe3O4, Ca0.15Fe2.85O4 and FeCr2O4. Magnesium ferrite (MgFe2O4), observed in the XRD patterns as overlapped peaks, was not identified in the Mössbauer spectroscopy analysis

No abstract

No abstract