O lodo têxtil é um resíduo resultante do procedimento de tratamento físico-químico do efluente das lavanderias têxteis. Esse material é classificado pela norma brasileira como resíduo não perigoso, tendo em vista que, apesar da sua variada composição química, seus componentes não apresentam grandes riscos de contaminação humana. Diante do descarte inadequado desse resíduo na região do Agreste pernambucano pelas lavanderias, percebeu-se a necessidade da geração de alternativas que proporcionem o uso desse material, uma vez que atualmente não há relatos acerca da sua reciclagem ou aproveitamento. O objetivo deste trabalho foi constatar que os materiais de construção são uma excelente matriz receptora desse resíduo, proporcionando uma redução considerável de seu descarte inadequado e dos possíveis danos ambientais. Para viabilizar o uso desse resíduo, o lodo foi caracterizado por meio de análises de massa específica, granulometria a laser, análise termogravimétrica e térmica diferencial, fluorescência de raios-X, difração de raios-X, microscopia eletrônica de varredura, espectroscopia no infravermelho por transformada de Fourier. Foi obtido um valor de 2,20 g/cm3 para sua massa específica e um diâmetro médio de partículas de 26,10 ± 0,65 μm, sendo 97,15% delas com diâmetro inferior a 80 μm, o que caracterizou o material como fíler. Quanto à sua composição, os principais componentes determinados foram CaO, MgO e SiO2, sendo o resíduo parcialmente amorfo com picos cristalinos. Ao submetê-lo ao aquecimento, ficou evidente que o lodo possui cerca de 20% de matéria orgânica. O lodo têxtil apresentou evidências positivas que reiteram a possibilidade de sua utilização como constituinte de materiais de construção alternativos.
A adesividade é um importante indicador de qualidade para misturas asfálticas de camadas de rolamento em pavimentos. Consequências frequentes da má adesividade do ligante ao agregado são deslizamento e desagregação, bem como a redução da durabilidade. Assim, é necessária a avaliação e compreensão integral deste fenômeno. Na presente pesquisa, foram utilizadas diferentes abordagens objetivando analisar a adesividade quando há incorporação de lodo têxtil, um resíduo industrial poluente proveniente também das lavanderias têxteis localizadas no APL de Confecções do Agreste Pernambucano, a matrizes asfálticas. O lodo foi adicionado diretamente ao material aderente nos teores de 2,0 e 3,0% em relação à massa total da mistura, sendo essas amostras comparadas, por meio da adesividade, a de referência, sem lodo. A adesividade foi analisada qualitativamente pelo ensaio convencional de adesividade, descrito pela norma brasileira DNIT ME 078/1994. A área de agregado recoberto por ligante foi calculada por meio do processamento digital de imagens e por fim, a interface da superfície da mistura foi analisada por microscopia petrográfica. Os resultados apontaram que a inserção de lodo na mistura não prejudica a adesividade da mesma, visto que as três amostras não apresentaram decapagem da película e a área recoberta por ligante foi de 100%. A microscopia petrográfica mostrou que a película de mastique (ligante e lodo têxtil) penetrou até mesmo poros de vazios menores, resultado que demonstra que o aumento de viscosidade não prejudicou o espalhamento na superfície do agregado e que as matrizes asfálticas podem ser uma boa forma de aprisionamento do resíduo estudado.
O aumento das emissões de gases de efeito estufa (GEE) tem intensificado o aquecimento global e evidenciado as mudanças climáticas no cenário nacional e mundial. Nesse contexto, torna-se necessário que sejam utilizadas ferramentas de monitoramento, como forma de conscientização visando à sua redução. Entretanto, esses cálculos são complexos e, para facilitá-los, podem ser utilizadas calculadoras de pegada, que se constituem como importantes ferramentas de comunicação sustentável. Neste estudo, foi utilizada a Calculadora de CO2 da Iniciativa Verde para obter os valores estimados de emissão relacionados a uma escola de ensino fundamental localizada na zona rural do Município de Caruaru, Estado de Pernambuco, Nordeste do Brasil. O plantio de árvores é uma possível alternativa de compensação e, de acordo com os dados da plataforma, pode ser obtido o quantitativo necessário para neutralizar as emissões. Foi realizado o plantio de 17 mudas de espécies endêmicas selecionadas, o que proporciona à escola o patamar de carbono zero.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.