In recent years, organic resistive memory devices in which active organic materials possess at least two stable resistance states have been extensively investigated for their promising memory potential. From the perspective of device fabrication, their advantages include simple device structures, low fabrication costs, and printability. Furthermore, their exceptional electrical performances such as a nondestructive reading process, nonvolatility, a high ON/OFF ratio, and a fast switching speed meet the requirements for viable memory technologies. Full understanding of the underlying physics behind the interesting phenomena is still challenging. However, many studies have provided useful insights into scientific and technical issues surrounding organic resistive memory. This Feature Article begins with a summary on general characteristics of the materials, device structures, and switching mechanisms used in organic resistive devices. Strategies for performance enhancement, integration, and advanced architectures in these devices are also presented, which may open a way toward practically applicable organic memory devices.

Two-dimensional (2D) molybdenum disulphide (MoS2) atomic layers have a strong potential to be used as 2D electronic sensor components. However, intrinsic synthesis challenges have made this task difficult. In addition, the detection mechanisms for gas molecules are not fully understood. Here, we report a high-performance gas sensor constructed using atomic-layered MoS2 synthesised by chemical vapour deposition (CVD). A highly sensitive and selective gas sensor based on the CVD-synthesised MoS2 was developed. In situ photoluminescence characterisation revealed the charge transfer mechanism between the gas molecules and MoS2, which was validated by theoretical calculations. First-principles density functional theory calculations indicated that NO2 and NH3 molecules have negative adsorption energies (i.e., the adsorption processes are exothermic). Thus, NO2 and NH3 molecules are likely to adsorb onto the surface of the MoS2. The in situ PL characterisation of the changes in the peaks corresponding to charged trions and neutral excitons via gas adsorption processes was used to elucidate the mechanisms of charge transfer between the MoS2 and the gas molecules.

We report the production of a two-dimensional (2D) heterostructured gas sensor. The gas-sensing characteristics of exfoliated molybdenum disulfide (MoS2) connected to interdigitated metal electrodes were investigated. The MoS2 flake-based sensor detected a NO2 concentration as low as 1.2 ppm and exhibited excellent gas-sensing stability. Instead of metal electrodes, patterned graphene was used for charge collection in the MoS2-based sensing devices. An equation based on variable resistance terms was used to describe the sensing mechanism of the graphene/MoS2 device. Furthermore, the gas response characteristics of the heterostructured device on a flexible substrate were retained without serious performance degradation, even under mechanical deformation. This novel sensing structure based on a 2D heterostructure promises to provide a simple route to an essential sensing platform for wearable electronics.

No abstract

Flexible materials and devices could be exploited in light-emitting diodes, electronic circuits, memory devices, sensors, displays, solar cells and bioelectronic devices. Nanoscale elements such as thin films, nanowires, nanotubes and nanoparticles can also be incorporated into the active films of mechanically flexible devices. Large-area devices containing extremely thin films of molecular materials represent the ultimate scaling of flexible devices based on organic materials, but the influence of bending and twisting on the electrical and mechanical stability of such devices has never been examined. Here, we report the fabrication and characterization of two-terminal electronic devices based on self-assembled monolayers of alkyl or aromatic thiol molecules on flexible substrates. We find that the charge transport characteristics of the devices remain stable under severe bending conditions (radius ≤ 1 mm) and a large number of repetitive bending cycles (≥1,000). The devices also remain reliable in various bending configurations, including twisted and helical structures.