The step-wise growth of epitaxial Fe on Cu(001)/Si(001), investigated by in-situ polarized neutron reflectometry is presented. A sputter deposition system was integrated into the neutron reflectometer AMOR at the Swiss neutron spallation source SINQ, which enables the analysis of the microstructure and magnetic moments during all deposition steps of the Fe layer. We report on the progressive evolution of the accessible parameters describing the microstructure and the magnetic properties of the Fe film, which reproduce known features and extend our knowledge on the behavior of ultrathin iron films.
We report on the realization of a sputter deposition system for the in situ-and in operando-use in polarized neutron reflectometry experiments. Starting with the scientific requirements, which define the general design considerations, the external limitations and boundaries imposed by the available space at a neutron beamline and by the neutron and vacuum compatibility of the used materials, are assessed. The relevant aspects are then accounted for in the realization of our highly mobile deposition system, which was designed with a focus on a quick and simple installation and removability at the beamline. Apart from the general design, the in-vacuum components, the auxiliary equipment and the remote control via a computer, as well as relevant safety aspects are presented in detail.
Originating from the demand for obtaining depth‐resolved magnetization profiles from thin films and heterostructures, polarized neutron reflectometry (PNR) has developed into a unique research tool, which also finds application in the analysis of superconducting or soft matter thin films. While certain in situ sample environments such as gas‐loading or humidity cells were quickly realized after PNR first emerged, preparing and growing thin magnetic films directly in the neutron beam could only be realized in recent years. Herein, a dedicated insight is given on the history and development of in situ thin film growth capabilities for PNR, from early pioneering experiments to the present day. The scientific and technological challenges as well as the advances of neutron sources, neutronics, and data treatment that have led to its realization are highlighted together with the unique research opportunities that it provides and recently obtained experimental results.
Fe layers with thicknesses between 5 and 100 nm were sputtered on mesoporous nanostructured anatase TiO 2 templates. The morphology of these hybrid films was probed with grazing-incidence small-angle X-ray scattering and X-ray reflectivity, complemented with magnetic measurements. Three different stages of growth were found, which are characterized by different correlation lengths for each stage. The magnetic behavior correlates with the different growth regimes. At very small thicknesses the TiO 2 template is coated and a porous Fe film results, with in-plane and out-of-plane magnetization components. With increasing thickness, agglomeration of Fe occurs and the magnetization gradually turns mostly in plane. At large thicknesses, the iron grows independently of the template and the magnetization is predominantly in plane with a bulk-like characteristic. research papers J. Appl. Cryst. (2014). 47 Patrick Ziegler et al. Self-organization of Fe clusters 9 of 10
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.