No abstract

This article presents a comprehensive method to efficiently design capacitively enhanced resonant on-chip antennas using an equivalent circuit (EC) model instead of computationally demanding full-wave simulations. To systemize the design process by predicting the radiation efficiency, the input impedance, the current and voltage distributions, and the radiation pattern of the antenna based on an EC, a method to extract both dissipation and radiation mechanisms from full-wave simulation data is described and carried out. Based on this separation of loss mechanisms, an EC-based antenna optimization with respect to the radiation efficiency is conceivably possible. Additional to the EC, which enables this efficient antenna optimization and increases the physical insight in the radiation mechanism, an analytical estimation of key antenna parameters, as the resonant length, is presented. The results from the analytical calculations and the antenna parameters calculated using the EC model are compared with full-wave FDTD simulations and used to discuss the capabilities and limitations of the EC model. Finally, an on-chip antenna of the considered type operating at 290-300 GHz and manufactured with silicon-germanium technology is used to verify the full-wave antenna simulations and the presented approach in general. Index Terms-Antennas' theory and design, equivalent circuit (EC), millimeter-wave and terahertz components, passive component modeling, silicon-germanium (SiGe/Si) technologies. I. INTRODUCTIONT HE need for highly efficient mm-wave on-chip antennas manifests in numerous applications, namely high-resolution radar imaging [1], detailed material characterization [2], and high-data-rate communication [3]. A key parameter to increase the performance of the overall system is reducing the loss contributions of the transducer between the front end and free space, namely the antenna. These loss Manuscript

No abstract

THz communications is envisaged for wide bandwidth mobile communications eventually reaching data capacities exceeding 100 Gbit/s. The technology enabling compact chip-integrated transceivers with highly directive, steerable antennas is the key challenge at THz frequencies to overcome the very high free-space path losses and to support user mobility. In this article, we report on mobile and multi-user THz communications using a photonic THz transmitter chip featuring 1D beam steering for the first time. In the proposed approach, 1D THz beam steering is achieved by using a photodiode excited leaky-wave antenna (LWA) in the transmitter chip. The on-chip LWA allows to steer the directive THz beam from 6° to 39° within the upper WR3-band (0.28-0.33 THz). The antenna’s directivity is 14 dBi which is further increased to 23 dBi using an additional hemicylindrical Teflon lens. The 3-dB beam width and coherence bandwidth of the fabricated THz transmitter chips with lens are 9° and 12 GHz, respectively. The proposed approach allows steering the THz beam via the beat frequency of an optical heterodyne system at a speed up to 28°/s. Without using a THz amplifier in the transmitter chip, a data rate of 24 Gbit/s is achieved for a single user for all beam directions and at short wireless distances up to 6 cm. The wireless distance is successfully increased to 32 cm for a lower data rate of 4 Gbit/s, still without using a transmitter amplifier. Also, multi-user THz communications and the overall capacity of the developed THz transmitter chip is studied revealing that up to 12 users could be supported together with a total wireless data capacity of 48 Gbit/s. Fully integrated 2D transmitter chips are expected to reach wireless distances of several meters without additional amplifiers.

With the increase in potential uses of terahertz technology, the need for terahertz transceivers with application-oriented adaptive radiation patterns has emerged. Reconfigurable reflectarrays consisting of actuated sub-wavelength reflectors have been successfully used for terahertz beam steering and beamforming. They do not require a complex feeding network and associated electronics, enabling a compact and power-efficient terahertz beam steering system. However, the current reflectarray-based beam steering is accomplished by forming the reflectarray as a grating structure, which is accompanied by the problems such as grating lobes, limited steering range, and discrete steering angles. Here, we configure a MEMS-based reflectarray with the genetic algorithm to eliminate the grating lobes and open up the possibility of customizing its radiation pattern. We used single-and multi-objective optimization to find the optimal height profile of the reflectarray and verified the results by full-wave electromagnetic simulations. We measured the radiation patterns of four reflectarray phantoms, i.e. reflectarrays without the MEMS actuation systems. The measurement results agree well with the calculated ones, with the main beam deviating at most 2 • from the target direction. Our work demonstrates how a genetic algorithm is used to shape a reconfigurable terahertz reflectarray to eliminate the grating lobes and tailor some specific featuress in its radiation pattern.