This paper mainly describes a novel biodegradable material poly (butylene carbonate) (PBC) to blending toughing modification for polylactic acid (PLA), and prepared the PBC/PLA biodegradable film) of improved toughness. To research the effect of thermol performance and mechanical properties (tensile strength and breaking elongation rate) through Fourier transform infrared spectroscopy (FTIR), differential thermal scanning calorimetry analysis (DSC) and tensile testing to expound different ratio of PBC and additive plasticizer, (lubricant and chain extender) .
This paper details the preparation of one kind of PEG/MMT solid-solid phase change materials. With polyethylene glycol (PEG) as the phase change materials, montmorillonite (MMT) as skeletons, through the graft copolymerization method, prepare PEG/MMT solid-solid phase change energy storage materials. The structure, the phase transition behavior and thermal stability of PEG/MMT phase change materials were analyzed and studied by infrared spectroscopy (FTIR), thermogravimetry (TG) and differential scanning calorimetry (DSC), and studied the influence of different molecular weight PEG on the capability and structure of the material, polymer phase change energy storage behavior and crystallization behavior. Finally, The PEG/MMT solid-solid phase change material could improve enthalpy value and thermal stability.
A novel method is proposed to modify montmorillonite with coupling agents and Hexadecyl triphenyl phosphonium bromide surfactants made by our group (named P-surfactant in the following). The structure of organophilic montmorillonite (OMMT) was investigated by FT-IR, XRD and TG. The FT-IR shows the coupling agents were inserted between the layers of MMT and reacted with –OH of MMT. The results of X-ray diffraction shows that the coupling agents were all intercalated into the layers of MMT. The interlayer spacing of montmorillonite increases to 4.00 nm, the effect of modification is well. The results of TG showed the thermal stability was better.
In this paper, the diphenyl methane diisocyanate (MDI) was used to modify montmorillonoid (MMT) and got the organic montmorillonite (OMMT), which was used with the monomers of PET by in situ polymerization method to prepare PET/MMT nanocomposition. The OMMT was analyzed by the X ray diffraction (XRD) to test the change of the spacing layer. Dispersion of MMT in the PET/MMT nanocomposites were studied with XRD and SEM and by means of thermogravimetric analyzer (TGA) on the thermal stability of PET/MMT nanocomposites. The results showed that, MDI modified MMT successfully, and the compatibility of MMT and PET was increased .
In this article, the methylene diphenyl isocyanate (MDI) containing two benzene rings was used to modify montmorillonite. The detection analysis of the original MMT and the samples after modification were investigated by infrared spectroscopy (FT-IR), x-ray diffraction (XRD) and thermo gravimetry (TG). Analysis of detection results shows that MDI and the surface of montmorillonite form chemical bonds and the spacing of montmorillonite layer increases from 1.24 nm to 1.86 nm. It provides highly active terminal isocyanate groups in situ polymerization for the montmorillonite and smart materials. It will improve the compatibility of the MMT and polymer, and allows the montmorillonite have always been able to maintain a good dispersion in polymer. Meanwhile the diphenyl isocyanate into ring can improve the heat stability of montmorillonite-modified polymer.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.