No abstract

Ceramics suffer the curse of extreme brittleness and demand new design philosophies and novel concepts of manufacturing to overcome such intrinsic drawbacks, in order to take advantage of most of their excellent properties. This has been one of the foremost challenges for ceramic material experts. Tailoring the ceramics structures at nanometre level has been a leading research frontier; whilst upgrading via reinforcing ceramic matrices with nanomaterials including the latest carbon nanotubes (CNTs) and graphene has now become an eminent practice for advanced applications. Most recently, several new strategies have indeed improved the properties of the ceramics/CNT nanocomposites, such as by tuning with dopants, new dispersions routes and modified sintering methods. The utilisation of graphene in ceramic nanocomposites, either as a solo reinforcement or as a hybrid with CNTs, is the newest development. This article will summarise the recent advances, key difficulties and potential applications of the ceramics nanocomposites reinforced with CNTs and graphene.

No abstract

Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along with a promising 70% wear rate reduction, and a hybrid reinforcement consisting of 0.3 wt.% GNPs + 1 wt.% CNTs resulted in even better performance, with a 86% reduction in the wear rate. The extent of damage to the reinforcement phases caused during wear was studied using Raman spectroscopy. The wear mechanisms for the composites were analysed based on the mechanical properties, brittleness index and microstructural characterizations. The excellent coordination between GNPs and CNTs contributed to the excellent wear resistance property in the hybrid GNT-reinforced composites. GNPs played the important role in the formation of a tribofilm on the worn surface by exfoliation; whereas CNTs contributed to the improvement in fracture toughness and prevented the grains from being pulled out during the tribological test.

No abstract

Because of its special chemical composition, graphite oxide has peculiar influences on electrochemical processes. The existence of various functional groups significantly affects electropolymerization processes and the formation of conductive polymers. Electrochemical synthesis of polyaniline (as a prototype of conductive polymers) on a paste‐based substrate of graphite oxide was investigated. In this case, the electropolymerization is significantly different from conventional cases, and the polymer is generated just during the first potential cycle. This can be attributed to the fact that graphite oxide can assist the monomer oxidation. Alternatively, electropolymerization was successfully performed inside the graphite oxide layers via electrochemical treatment of aniline‐intercalated graphite oxide in the supporting electrolyte. Although these phenomena are related to the chemical composition of graphite oxide, the graphite prepared by the reduction of graphite oxide also displayed some advantages for the electropolymerization (over natural graphite). There is an emphasis on the morphological investigations throughout this study, because novel morphologies were observed in the system under investigation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2204–2213, 2010

No abstract

In this study, hydroxyapatite (denoted as HAp) nanostructure with uniform morphologies, controllable size, nano-dispersion and narrow size distribution in diameter has been synthesized successfully by low-temperature hydrothermal process, and the as-synthesized powders were characterized by XRD, scanning electron microscopy, high-resolution transmission microscopy, FT-IR, Zetasizer and inductively coupled plasma. In the present work, a novel sonochemical technique using CaHPO(4)2H(2)O/NaOH/distilled water with cetyltrimethylammonium bromide ((CH(3)(CH(2))(15)N(+)(CH(3))(3)Br(-)) designated as CTAB) under a hydrothermal condition to synthesize HAp nanostructure was described. Furthermore, the usage of a high basic condition and a water environment are the two crucial keys in ensuring the formation of HAp in the hydrothermal/sonochemical processes. However, the crystallite size and crystallinity degree of the HAp increased with increasing annealing temperature. Indeed, the present work will introduce a new method in synthesizing HAs for scientific and medical engineering.