We survey the current state of phase change memory (PCM), a non-volatile solid-state memory technology built around the large electrical contrast between the highly-resistive amorphous and highly-conductive crystalline states in so-called phase change materials. PCM technology has made rapid progress in a short time, having passed older technologies in terms of both sophisticated demonstrations of scaling to small device dimensions, as well as integrated large-array demonstrators with impressive retention, endurance, performance and yield characteristics. We introduce the physics behind PCM technology, assess how its characteristics match up with various potential applications across the memory-storage hierarchy, and discuss its strengths including scalability and rapid switching speed. We then address challenges for the technology, including the design of PCM cells for low RESET current, the need to control device-to-device variability, and undesirable changes in the phase change material that can be induced by the fabrication procedure. We then turn to issues related to operation of PCM devices, including retention, device-to-device thermal crosstalk, endurance, and bias-polarity effects. Several factors that can be expected to enhance PCM in the future are addressed, including Multi-Level Cell technology for PCM (which offers higher density through the use of intermediate resistance states), the role of coding, and possible routes to an ultra-high density PCM technology.Comment: Review articl

No abstract

Storage-class memory (SCM) combines the benefits of a solidstate memory, such as high performance and robustness, with the archival capabilities and low cost of conventional hard-disk magnetic storage. Such a device would require a solid-state nonvolatile memory technology that could be manufactured at an extremely high effective areal density using some combination of sublithographic patterning techniques, multiple bits per cell, and multiple layers of devices. We review the candidate solid-state nonvolatile memory technologies that potentially could be used to construct such an SCM. We discuss evolutionary extensions of conventional flash memory, such as SONOS (silicon-oxide-nitrideoxide-silicon) and nanotraps, as well as a number of revolutionary new memory technologies. We review the capabilities of ferroelectric, magnetic, phase-change, and resistive random-access memories, including perovskites and solid electrolytes, and finally organic and polymeric memory. The potential for practical scaling to ultrahigh effective areal density for each of these candidate technologies is then compared.

The emergence of new nonvolatile memory (NVM) technologies—such as phase change memory, resistive, and spin-torque-transfer magnetic RAM—has been motivated by exciting applications such as storage class memory, embedded nonvolatile memory, enhanced solid-state disks, and neuromorphic computing. Many of these applications call for such NVM devices to be packed densely in vast “crosspoint” arrays offering many gigabytes if not terabytes of solid-state storage. In such arrays, access to any small subset of the array for accurate reading or low-power writing requires a strong nonlinearity in the IV characteristics, so that the currents passing through the selected devices greatly exceed the residual leakage through the nonselected devices. This nonlinearity can either be included explicitly, by adding a discrete access device at each crosspoint, or implicitly with an NVM device which also exhibits a highly nonlinear IV characteristic. This article reviews progress made toward implementing such access device functionality, focusing on the need to stack such crosspoint arrays vertically above the surface of a silicon wafer for increased effective areal density. The authors start with a brief overview of circuit-level considerations for crosspoint memory arrays, and discuss the role of the access device in minimizing leakage through the many nonselected cells, while delivering the right voltages and currents to the selected cell. The authors then summarize the criteria that an access device must fulfill in order to enable crosspoint memory. The authors review current research on various discrete access device options, ranging from conventional silicon-based semiconductor devices, to oxide semiconductors, threshold switch devices, oxide tunnel barriers, and devices based on mixed-ionic-electronic-conduction. Finally, the authors discuss various approaches for self-selected nonvolatile memories based on Resistive RAM.

Using 2 phase-change memory (PCM) devices per synapse, a 3-layer perceptron network with 164,885 synapses is trained on a subset (5000 examples) of the MNIST database of handwritten digits using a backpropagation variant suitable for NVM+selector crossbar arrays, obtaining a training (generalization) accuracy of 82.2% (82.9%). Using a neural network (NN) simulator matched to the experimental demonstrator, extensive tolerancing is performed with respect to NVM variability, yield, and the stochasticity, linearity and asymmetry of NVM-conductance response.