Hybrid composite specimens were produced with stainless steel-acrylic (SSA) and carbon fiber reinforcement in order to achieve ductile behavior compared to CF reinforced epoxy composites. Laminated composites containing CF and SSA fabrics in with different ply configurations were manufactured using vacuum infusion method. In addition, CF fabric was used in two different ply orientations (0–45°). In both the flexural and tensile test results, composites having CF oriented at 0° showed higher strength and modulus but lower strain than composites having CF oriented at 45°. When the number of carbon fiber layers increased, the composites showed high strength and modulus, but low strain. Increasing the number of SSA significantly increased the flexural and tensile strains of laminated composites. After the mechanical tests, the fracture surfaces of the specimens were examined with an optical microscope and matrix cracks, fiber breakage, fiber pull-out and delamination failures were observed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.