The irregularity of recent Convolutional Neural Network (CNN) models such as less data reuse and parallelism due to the extensive network pruning and simplification creates new challenges for FPGA acceleration. Furthermore, without proper optimization, there could be significant overheads when integrating FPGAs into existing machine learning frameworks like TensorFlow. Such a problem is mostly overlooked by previous studies. However, our study shows that a naive FPGA integration into TensorFlow could lead to up to 8.45× performance degradation. To address the challenges mentioned above, we propose several SW/HW co-design approaches to perform the end-to-end optimization of deep learning applications. We present a flexible and composable architecture called FlexCNN. It can deliver high computation efficiency for different types of convolution layers using techniques including dynamic tiling and data layout optimization. FlexCNN is further integrated into the TensorFlow framework with a fully-pipelined software-hardware integration flow. This alleviates the high overheads of TensorFlow-FPGA handshake and other non-CNN processing stages. We use OpenPose, a popular CNN-based application for human pose recognition, as a case study. Experimental results show that with the FlexCNN architecture optimizations, we can achieve 2.3× performance improvement. The pipelined integration stack leads to a further 5× speedup. Overall, the SW/HW co-optimization produces a speedup of 11.5× and results in an end-to-end performance of 23.8FPS for OpenPose with floating-point precision, which is the highest performance reported for this application on FPGA in the literature.

Adopting FPGA as an accelerator in datacenters is becoming mainstream for customized computing, but the fact that FPGAs are hard to program creates a steep learning curve for software programmers. Even with the help of high-level synthesis (HLS) , accelerator designers still have to manually perform code reconstruction and cumbersome parameter tuning to achieve optimal performance. While many learning models have been leveraged by existing work to automate the design of efficient accelerators, the unpredictability of modern HLS tools becomes a major obstacle for them to maintain high accuracy. To address this problem, we propose an automated DSE framework— AutoDSE —that leverages a bottleneck-guided coordinate optimizer to systematically find a better design point. AutoDSE detects the bottleneck of the design in each step and focuses on high-impact parameters to overcome it. The experimental results show that AutoDSE is able to identify the design point that achieves, on the geometric mean, 19.9× speedup over one CPU core for MachSuite and Rodinia benchmarks. Compared to the manually optimized HLS vision kernels in Xilinx Vitis libraries, AutoDSE can reduce their optimization pragmas by 26.38× while achieving similar performance. With less than one optimization pragma per design on average, we are making progress towards democratizing customizable computing by enabling software programmers to design efficient FPGA accelerators.

With reduced data reuse and parallelism, recent convolutional neural networks (CNNs) create new challenges for FPGA acceleration. Systolic arrays (SAs) are efficient, scalable architectures for convolutional layers, but without proper optimizations, their efficiency drops dramatically for reasons: 1) the different dimensions within same-type layers, 2) the different convolution layers especially transposed and dilated convolutions, and 3) CNN’s complex dataflow graph. Furthermore, significant overheads arise when integrating FPGAs into machine learning frameworks. Therefore, we present a flexible, composable architecture called FlexCNN, which delivers high computation efficiency by employing dynamic tiling, layer fusion, and data layout optimizations. Additionally, we implement a novel versatile SA to process normal, transposed, and dilated convolutions efficiently. FlexCNN also uses a fully-pipelined software-hardware integration that alleviates the software overheads. Moreover, with an automated compilation flow, FlexCNN takes a CNN in the ONNX representation, performs a design space exploration, and generates an FPGA accelerator. The framework is tested using three complex CNNs: OpenPose, U-Net, and E-Net. The architecture optimizations achieve 2.3 × performance improvement. Compared to a standard SA, the versatile SA achieves close-to-ideal speedups, with up to 15.98 × and 13.42 × for transposed and dilated convolutions, with a 6% average area overhead. The pipelined integration leads to a 5 × speedup for OpenPose.

Sparse-Matrix Dense-Matrix multiplication (SpMM) is the key operator for a wide range of applications including scientific computing, graph processing, and deep learning. Architecting accelerators for SpMM is faced with three challenges -(1) the random memory accessing and unbalanced load in processing because of random distribution of elements in sparse matrices, (2) inefficient data handling of the large matrices which can not be fit on-chip, and (3) a non-general-purpose accelerator design where one accelerator can only process a fixed-size problem.In this paper, we present Sextans, an accelerator for generalpurpose SpMM processing. Sextans accelerator features (1) fast random access using on-chip memory, (2) streaming access to offchip large matrices, (3) PE-aware non-zero scheduling for balanced workload with an II=1 pipeline, and (4) hardware flexibility to enable prototyping the hardware once to support SpMMs of different size as a general-purpose accelerator. We leverage high bandwidth memory (HBM) for the efficient accessing of both sparse and dense matrices. In the evaluation, we present an FPGA prototype Sextans which is executable on a Xilinx U280 HBM FPGA board and a projected prototype Sextans-P with higher bandwidth competitive to V100 and more frequency optimization. We conduct a comprehensive evaluation on 1,400 SpMMs on a wide range of sparse matrices including 50 matrices from SNAP and 150 from SuiteSparse. We compare Sextans with NVIDIA K80 and V100 GPUs. Sextans achieves a 2.50x geomean speedup over K80 GPU and Sextans-P achieves a 1.14x geomean speedup over V100 GPU (4.94x over K80). The code is available at https://github.com/linghaosong/Sextans.

Adopting FPGA as an accelerator in datacenters is becoming mainstream for customized computing, but the fact that FPGAs are hard to program creates a steep learning curve for software programmers. Even with the help of high-level synthesis (HLS), accelerator designers still have to manually perform code reconstruction and cumbersome parameter tuning to achieve the optimal performance. While many learning models have been leveraged by existing work to automate the design of efficient accelerators, the unpredictability of modern HLS tools becomes a major obstacle for them to maintain high accuracy. In this paper, we address this problem by incorporating an automated DSE framework-AutoDSE-that leverages a bottleneck-guided gradient optimizer to systematically find a better design point. AutoDSE finds the bottleneck of the design in each step and focuses on high-impact parameters to overcome that, which is similar to the approach an expert would take. The experimental results show that AutoDSE is able to find the design point that achieves, on the geometric mean, 19.9× speedup over one CPU core for Machsuite and Rodinia benchmarks and 1.04× over the manually designed HLS accelerated vision kernels in Xilinx Vitis libraries yet with 26× reduction of their optimization pragmas. With less than one optimization pragma per design on average, we are making progress towards democratizing customizable computing by enabling software programmers design efficient FPGA accelerators.

No abstract

No abstract

No abstract