One of the main wastes of the coal industry is water from production processes of coal mine wastewater that collect in the artificial lake was dissolving rocks and oxidation process from waste mining material so that potentially produce acid mine water containing unwanted materials and harmful to the environment. It is necessary to identify the water quality of the lake so that it can be known the design of its conservation. ABSTRAKSalah satu limbah utama dari industri batu bara adalah air dari proses produksi dan aktivitas lain yang ditampung dalam danau buatan. Air limbah dalam danau buatan ini mengalami pelarutan batuan dan proses oksidasi dari material sisa penambangan sehingga berpotensi menghasilkan air asam tambang yang mengandung bahan-bahan yang tidak diinginkan dan berbahaya bagi lingkungan. Untuk memanfaatkan air bekas tambang tersebut perlu dilakukan identifikasi kualitas air danau sehingga dapat diketahui perancangan konservasinya. Tujuan paper ini ingin memaparkan kondisi eksisting kualitas air bekas tambang, khususnya nilai BOD (biological oxygen dissolved) dan COD (chemical oxygen demand) serta parameter penunjang lainnya. Untuk mencapai tujuan tersebut, telah dilakukan survei pengukuran data kedalaman kolam, temperatur, pH, oksigen terlarut (DO), dan kandungan klorofil a secara langsung dengan menggunakan probe sensor multi parameter (Chlorotec, type AAQ1183, Alec Electronics), serta mengambil sampel di 11 stasiun untuk diketahui data BOD dan COD. Hasil analisis data menunjukkan Nilai BOD, COD danau berkisar 2 dan 5,57 mg/l. Nilai ini ditunjang oleh nilai parameter DO dan pH yang relatif baik. Nilai DO sekitar 2,8-6,89 (4,71 1.28) mg/l dan nilai pH sekitar 6 -7,8 (7,1 0,55). Secara umum air pada danau Sangatta North dalam kondisi stabil dan normal sehingga dapat dimanfaatkan untuk kepentingan sarana rekreasi air, pembudidayaan ikan air tawar, peternakan, pengairan pertanian dan peruntukan lain yang mempersyaratkan mutu air pada kelas II.Kata kunci: BOD (biological oxygen dissolved), COD (chemical oxygen demand), danau bekas batu bara, DO (dissolved oxygen)
The production process of crude palm oil (CPO) Keywords: CPO, biodiesel, palm oil, palm solid waste, NER, NEB, LCA ABSTRAKProses produksi crude palm oil (CPO) dan biodiesel kelapa sawit menghasilkan limbah padat sebanyak 35-40% dari total tandan buah segar (TBS) yang diolah, dalam bentuk tandan buah kosong, serat, cangkang buah dan abu bakar. Keberadaan limbah yang melimpah ini berpotensi mencemari lingkungan bila tidak tertangani dengan baik. Penelitian ini bertujuan untuk membahas dan menghitung potensi limbah padat sawit menjadi energi terbarukan dan pengaruhnya terhadap peningkatan nilai net energy ratio (NER) dan net energy balance (NEB). Dalam penelitian ini digunakan metode life cycle assessment (LCA) untuk menghitung neraca limbah padat yang hasilnya akan dikonversikan ke dalam nilai faktor energi dari sumber pustaka yang terpercaya. Hasil neraca massa limbah sawit menunjukkan bahwa total limbah padat serat dan cangkang yang dihasilkan setiap pengolahan 1 ton TBS adalah 130 kg dan 65 kg. Limbah ini bila digunakan sebagai bahan bakar boiler akan berpotensi menghasilkan energi sebesar 10.118 MJ/ton biodiesel. Tambahan energi terbarukan ini akan meningkatkan nilai NER dan NEB secara signifikan. Nilai NEB naik 27.199 MJ menjadi sekitar 37.317 MJ (37,2%) dan nilai NER naik dari 3,19 menjadi 4,01 atau meningkat 25,5%.Kata kunci : CPO, biodiesel, kelapa sawit, limbah padat sawit, NER, NEB, LCA 1. PENDAHULUAN Latar BelakangIndustri kelapa sawit Indonesia merupakan salah satu industri strategis penyumbang devisa bagi negara dari sektor non-migas. Pada tahun 2016, Badan Pengelola Perkebunan Dana Sawit (BPDP Sawit) mencatat ekspor sawit Indonesia mencapai 25,7 juta ton atau senilai US$ 17,8 miliar atau sekitar Rp 240 triliun. Perkembangan industri kelapa sawit Indonesia terus meningkat dan menjadi negara produsen CPO terbesar di dunia dengan total produksi sebesar 32 juta ton atau sekitar 46,6% dari total produksi CPO dunia (1) . Permintaan pasar dunia terhadap CPO terus meningkat. Data dari world statistik menyebutkan bahwa estimasi kebutuhan CPO dunia pada tahun 2020 sebesar 95,7 juta ton (2) . Kondisi ini menunjukkan bahwa masa depan industri kelapa sawit Indonesia berpotensi untuk terus berkembang untuk mencukupi kebutuhan CPO dunia.Selain semakin meningkatnya produksi dan proyeksi pasar industri sawit yang cerah, di sisi lain pabrik sawit dapat menimbulkan masalah yakni adanya peningkatan volume limbahnya.
Perubahan kualitas air pada perairan umum seperti Sungai Cisadane mengalami dinamika yang cepat akibat besarnya beban pencemar dari aktivitas masyarakat di sepanjang sungai. Perubahan kualitas air yang cepat ini menuntut diterapkannya inovasi pemantauan kualitas air secara online untuk mengetahui kualitas air sungai dan memperkirakan indikasi sumber pencemaran secara lebih cepat dan realtime, sehingga dapat mencegah pencemaran yang semakin meningkat. Penelitian ini berfokus pada laporan pemantauan kualitas air Sungai Cisadane secara online menggunakan sistem telemetri Onlimo. Sensor yang digunakan terdiri sensor suhu, daya hantar listrik, TDS, kekeruhan, DO, pH, dan nitrat yang ditempatkan di 3 stasiun Sungai Cisadane. Data hasil pemantauan dikirim dan diolah secara online kemudian dianalsis dengan menggunakan metode STORET. Hasil analisis menyatakan bahwa secara umum kondisi kualitas air Sungai Cisadane dalam katagori tercemar sedang, sehingga tidak memenuhi baku mutu peruntukan Kelas II, tertutama untuk parameter TDS, DO, pH dan nitrat.
AbstrakMakalah ini membahas tentang desain sistem kendali router berbasis computer numerical control (CNC) menggunakan personal computer (PC), untuk diimplementasikan di flame cutting machine (FCM). NC-Code yang diinputkan ke komputer diterjemahkan menjadi sinyal perintah yang dikirimkan PC ke microcontroller untuk mengendalikan gerakkan end effector mesin pada sumbu X dan sumbu Y secara simultan berdasarkan hasil perhitungan interpolasi linier dan interpolasi sirkular pada PC. Sistem kendali ini diimplementasikan pada FCM dengan menghubungkan output kendali dari microcontroller dengan driver aktuator FCM berupa motor DC. Hasil yang diperoleh berupa suatu prototipe sistem kendali router CNC untuk diimplementasikan di FCM dan mampu melakukan interpolasi linier dan interpolasi sirkular.Kata kunci: kontrol CNC, CNC based PC, routerCNC. Abstract This paper focuses on design of router control systems based on computer numerical control (CNC) using personal computer (PC) implemented in flame cutting machine (FCM). NC-Code entered into the computer I. PENDAHULUANAplikasi teknologi computer numerical control (CNC) dewasa ini telah berkembang luasuntuk mesin-mesin perkakas di industri manufaktur yang membutuhkan keunggulan dalam hal fleksibilitas, akurasi, dan kemampuan pengulangan dibandingkan mesin konvensional [1]. Mesin ini harus mampu mengulang gerakanidentik dengan jumlah banyak dengan ketelitian tinggi. Mesin CNC bekerja berdasarkan NC-Codeyang diinputkan oleh operator pada perangkat kendalinya [2]. Jika suatu program telah dibuat untuk membuat suatu produk, maka operator hanya tinggal mengulangi proses running dari program itu sebanyak produk yang ingin dihasilkan.Salah satu jenis mesin yang mengunakan teknologi CNC ialah mesin pemotong plat dengan berbagai macam model alat irisnya, diantaranya flame cutting machine produk LTech Peacemaker yang terdapat dilaboratorium CNC Teknik Mesin UGM [3]. Mesin ini memiliki kemampuan memotong platdengan kontur sesuai dengan program CNC yang diinputkan. Mesin ini mengalami kerusakan pada sistem pengontrol CNC, sehingga tidak dapat lagi dioperasikan. Salah satu kendala yang ada adalah sulit dan mahalnya suku cadang mesin.Sementara itu, saat ini sudah banyak dikembangkan penelitian mengenai pengendalian mesin CNC berbasis PC. Hal ini banyak dilakukan untuk menghasilkan mesin CNC yang lebih murah, serta dengan suku cadang yang mudah didapat [4] [5].Untuk itu, pada penelitian ini dilakukan desain sistem kendali router berbasis CNC menggunakan PC dengan tetap mempertahankan metode pengendalian mesin dengan NC-Code untuk dapat diimplementasikan di flame cutting
The government efforts to maintain national energy stability program through the increase energy supply and saving must be supported by all levels of society. Several energy observers and experts stated that the contribution of the domestic or household sector in the activities of energy saving program is quite significant because the percentage of household customers are relatively high. This paper analyzes the potential of providing research data on the percentage of electricity savings in the domestic or household sectors towards saving electricity nationally. The results of the study show that electrical devices commonly used in households still have the potential to be saved. Electrical devices that are often used at households and have great saving potentials are air conditioners and refrigerators. If each household customer saves 30% of electricity consumption, then the national electricity supply that can be saved will be around 5,679 GW, equivalent to 83.3 trillion rupiah. The saving program resulted in savings of electricity consumption of around 6% of all household consumers or around 2.9% of total national electricity consumption.Keywords: electrical energy, savings, households ABSTRAKUpaya pemerintah dalam menjaga kestabilan energi nasional melalui program peningkatan pasokan dan penghematan energi harus didukung oleh seluruh lapisan masyarakat. Para pengamat dan pakar energi menyatakan bahwa kontribusi sektor domestik atau rumah tangga dalam program penghematan konsumsi energi listrik cukup signifikan karena persentase jumlah pelanggan rumah tangga yang relatif tinggi. Penelitian ini menganalisis tentang potensi persentase penghematan energi listrik sektor domestik atau rumah tangga terhadap penghematan listrik secara nasional. Hasil penelitian menunjukkan bahwa piranti listrik yang biasa digunakan pada rumah tangga masih memiliki potensi untuk dilakukan penghematan. Piranti listrik yang sering digunakan pada rumah tangga dan memiliki potensi penghematan yang besar adalah alat pendingin ruangan (AC) dan kulkas. Bila setiap pelanggan rumah tangga melakukan penghematan konsumsi energi listriknya sebesar 30%, maka pasokan listrik nasional yang dapat dihemat adalah sekitar 5.679 GW atau setara dengan 83,3 Trilyun rupiah. Upaya ini menghasilkan penghematan konsumsi listrik sekitar 6% dari seluruh konsumen rumah tangga atau sekitar 2,9 % dari total konsumsi energi listrik nasional.Kata kunci: energi listrik, penghematan, rumah tangga
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.