We report on atomic layer deposited Hf0.5Zr0.5O2 (HZO)-based capacitors which exhibit excellent ferroelectric (FE) characteristics featuring a large switching polarization (45 μC/cm2) and a low FE saturation voltage (∼1.5 V) as extracted from pulse write/read measurements. The large FE polarization in HZO is achieved by the formation of a non-centrosymmetric orthorhombic phase, which is enabled by the TiN top electrode (TE) having a thickness of at least 90 nm. The TiN films are deposited at room temperature and annealed at 400 °C in an inert environment for at least 1 min in a rapid thermal annealing system. The room-temperature deposited TiN TE acts as a tensile stressor on the HZO film during the annealing process. The stress-inducing TiN TE is shown to inhibit the formation of the monoclinic phase during HZO crystallization, forming an orthorhombic phase that generates a large FE polarization, even at low process temperatures.
We present an Al2O3 dielectric layer on molybdenum
disulfide (MoS2), deposited using atomic layer deposition
(ALD) with ozone/trimethylaluminum (TMA) and water/TMA as precursors.
The results of atomic force microscopy and low-energy ion scattering
spectroscopy show that using TMA and ozone as precursors leads to
the formation of uniform Al2O3 layers, in contrast
to the incomplete coverage we observe when using TMA/H2O as precursors. Our Raman and X-ray photoelectron spectroscopy measurements
indicate minimal variations in the MoS2 structure after
ozone treatment at 200 °C, suggesting its excellent chemical
resistance to ozone.
We report on the effect of the Hf0.5Zr0.5O2 (HZO) film thickness on the ferroelectric and dielectric properties using pulse write/read measurements. HZO films of thicknesses ranging from 5 to 20 nm were annealed at 400 °C for 1 min in a nitrogen ambient to be compatible with the back-end of the line thermal budget. As the HZO film thickness decreases, low-voltage operation (1.0 V or less) can be achieved without the dead layer effect, although switching polarization (Psw) tends to decrease due to the smaller grain size. Meanwhile, for 20-nm-thick HZO films prepared under the identical stress (similar TiN top electrode thickness and thermal budget), the Psw and dielectric constant are reduced because of additional monoclinic phase formation.
With the continued miniaturization of devices in the semiconductor industry, atomic layer deposition (ALD) of silicon nitride thin films (SiNx) has attracted great interest due to the inherent benefits of this process compared to other silicon nitride thin film deposition techniques. These benefits include not only high conformality and atomic-scale thickness control, but also low deposition temperatures. Over the past 20 years, recognition of the remarkable features of SiNx ALD, reinforced by experimental and theoretical investigations of the underlying surface reaction mechanism, has contributed to the development and widespread use of ALD SiNx thin films in both laboratory studies and industrial applications. Such recognition has spurred ever-increasing opportunities for the applications of the SiNx ALD technique in various arenas. Nevertheless, this technique still faces a number of challenges, which should be addressed through a collaborative effort between academia and industry. It is expected that the SiNx ALD will be further perceived as an indispensable technique for scaling next-generation ultra-large-scale integration (ULSI) technology. In this review, the authors examine the current research progress, challenges and future prospects of the SiNx ALD technique.
Despite the number of existing studies that showcase the promising application of fluorinated graphene in nanoelectronics, the impact of the fluorine bonding nature on the relevant electrical behaviors of graphene devices, especially at low fluorine content, remains to be experimentally explored. Using CF4 as the fluorinating agent, we studied the gradual structural evolution of chemical vapor deposition graphene fluorinated by CF4 plasma at a working pressure of 700 mTorr using Raman and X-ray photoelectron spectroscopy (XPS). After 10 s of fluorination, our XPS analysis revealed a co-presence of covalently and ionically bonded fluorine components; the latter has been determined being a dominant contribution to the observation of two Dirac points in the relevant electrical measurement using graphene field effect transistor devices. Additionally, this ionic C-F component (ionic bonding characteristic charge sharing) is found to be present only at low fluorine content; continuous fluorination led to a complete transition to a covalently bonded C-F structure and a dramatic increase of graphene sheet resistance. Owing to the formation of these various C-F bonding components, our temperature-dependent Raman mapping studies show an inhomogeneous defluorination from annealing temperatures starting at ∼150 °C for low fluorine coverage, whereas fully fluorinated graphene is thermally stable up to ∼300 °C.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.