This work shows that after creating certain dual scale roughness structures by femtosecond laser irradiation different metal alloys initially show superhydrophilic behavior with complete wetting of the structured surface. However, over time, these surfaces become nearly superhydrophobic with contact angles in the vicinity of 150 degrees and superhydrophobic with contact angles above 150 degrees. The contact angle hysteresis was found to lie between 2 and 6 degrees. The change in wetting behavior correlates with the amount of carbon on the structured surface. The explanation for the time dependency of the surface wettability lies in the combined effect of surface morphology and surface chemistry.
Abstract:Femtosecond laser micromachining has emerged in recent years as a new technique for micro/nano structure fabrication because of its applicability to virtually all kinds of materials in an easy one-step process that is scalable. In the past, much research on femtosecond laser micromachining was carried out to understand the complex ablation mechanism, whereas recent works are mostly concerned with the fabrication of surface structures because of their numerous possible applications. The state-of-the-art knowledge on the fabrication of these structures on metals with direct femtosecond laser micromachining is reviewed in this article. The effect of various parameters, such as fluence, number of pulses, laser beam polarization, wavelength, incident angle, scan velocity, number of scans, and environment, on the formation of different structures is discussed in detail wherever possible. Furthermore, a guideline for surface structures optimization is provided. The authors' experimental work on laser-inscribed regular pattern fabrication is presented to give a complete picture of micromachining processes. Finally, possible applications of laser-machined surface structures in different fields are briefly reviewed.
Although the study of friction has a long history, ice friction has only been investigated during the last century. The basic physical concepts underlying the different friction regimes, such as boundary, mixed, and hydrodynamic friction are also relevant to ice friction. However, these friction regimes must be described with respect to the thickness of the lubricating liquidlike layer on ice. In this review the state of knowledge on the physics of ice friction is discussed. Surface melting theories are introduced. These theories attempt to explain the existence and nature of the liquidlike surface layer on ice at any temperature and without any load applied. Pressure melting, as the long-time explanation for the ease of ice friction, is discussed, together with the prevailing theory of frictional heating. The various laboratory setups for ice friction measurements are presented as well as their advantages and disadvantages. The individual influence of the different parameters on the coefficient of ice friction is discussed; these include the effects of temperature, sliding velocity, normal force exerted by the sliding object, the contact area between ice and slider, relative humidity, and also properties of the slider material such as surface roughness, surface structure, wettability, and thermal conductivity. Finally, the most important ice friction models based on the frictional heating theory are briefly introduced and research directions on the subject of ice friction are discussed.
The effects of ice formation and accretion on external surfaces range from being mildly annoying to potentially life-threatening. Ice-shedding materials, which lower the adhesion strength of ice to its surface, have recently received renewed research attention as a means to circumvent the problem of icing. In this work, we investigate how surface wettability and surface topography influence the ice adhesion strength on three different surfaces: (i) superhydrophobic laser-inscribed square pillars on copper, (ii) stainless steel 316 Dutch-weave meshes, and (iii) multiwalled carbon nanotube-covered steel meshes. The finest stainless steel mesh displayed the best performance with a 93% decrease in ice adhesion relative to polished stainless steel, while the superhydrophobic square pillars exhibited an increase in ice adhesion by up to 67% relative to polished copper. Comparisons of dynamic contact angles revealed little correlation between surface wettability and ice adhesion. On the other hand, by considering the ice formation process and the fracture mechanics at the ice-substrate interface, we found that two competing mechanisms governing ice adhesion strength arise on nonplanar surfaces: (i) mechanical interlocking of the ice within the surface features that enhances adhesion, and (ii) formation of microcracks that act as interfacial stress concentrators, which reduce adhesion. Our analysis provides insight toward new approaches for the design of ice-releasing materials through the use of surface topographies that promote interfacial crack propagation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.