A Moringa Oleífera Lam é uma oleaginosa que tem um grande potencial para a produção de bicombustível no semi-árido nordestino, uma vez que se adapta a várias condições climáticas. A semente produz entre 35 % a 40 % de óleo. O objetivo desse trabalho foi obter o biodiesel através do processo de transesterificação e caracterizar as propriedades físico-químicas do óleo e biodiesel de acordo com as normas estabelecidas pela ANP. O biodiesel foi produzido pela rota metílica com o catalisador KOH. Os resultados mostraram que a semente de moringa produz óleo em boa quantidade com características físico-químicas adequadas para ser usado como matéria prima na transesterificação para obtenção de biodiesel. O teor de óleo médio encontrado para as sementes de moringa foi de 40 %, fornecendo rendimento de 83,68% em biodiesel e conversão dos ácidos graxos em ésteres metílicos de 99,9 %.

No abstract

In this paper, a new synthesis method was proposed to obtain anatase titanium oxide (TiO 2) nanocrystals anchored into SBA-15 molecular sieve, as a matrix assigned by the in-situ anchoring (ISA) method. Pure SBA-15 and modified with TiO 2 nanocrystals at different Si/Ti molar ratios (R = 75, 50, and 25) were structurally characterized by X-ray diffraction (XRD), Micro-Raman and Fourier Transform infrared (FTIR) spectroscopies. Specific surface area, pore volume and average pore diameter were estimated using both Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) methods, respectively. Morphological aspects of these samples were observed by means of field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). Optical properties were investigated by ultravioletvisible (UV-vis) diffuse reflectance spectroscopy. XRD patterns, Micro-Raman and FT-IR spectra indicate the TiO 2 nanocrystals crystallized in a tetragonal structure anchored into the SBA-15 mesopores. BET and BJH methods prove a large amount of TiO 2 nanocrystals were anchored inside of SBA-15 mesopores due to increase in surface area and average pore size of SBA-15 matrix. FE-SEM and TEM images showed the pure SBA-15 has an elongated hexagon-shaped microstructure, and an average size of 7.34 nm for 2D hexagonal mesopores. Moreover, ISA method was able to avoid blocking of mesopores, in addition promotes a significant increasing the impregnation rate of anatase TiO 2 nanocrystals in SBA-15 matrix. A growth mechanism was proposed in order to explain the stages involved in the formation of TiO 2-SBA mesoporous. UV-vis spectra revealed a dependence of the optical band gap energy (E gap) with the decreasing of Si/Ti molar ratios.

No abstract

No abstract

No abstract

No abstract

No abstract