The valence-band discontinuities at various wurtzite GaN, AlN, and InN heterojunctions were measured by means of x-ray photoemission spectroscopy. A significant forward–backward asymmetry was observed in the InN/GaN–GaN/InN and InN/AlN–AlN/InN heterojunctions. The asymmetry was understood as a piezoelectric strain effect. We report the valence band discontinuities for InN/GaN=1.05±0.25 eV, GaN/AlN=0.70±0.24 eV, and InN/AlN=1.81±0.20 eV, all in the standard type I lineup. These values obey transitivity to within the experimental accuracy. Tables of photoemission core level binding energies are reported for wurtzite GaN, AlN, and InN.

The high natural abundance of silicon, together with its excellent reliability and good efficiency in solar cells, suggest its continued use in production of solar energy, on massive scales, for the foreseeable future. Although organics, nanocrystals, nanowires and other new materials hold significant promise, many opportunities continue to exist for research into unconventional means of exploiting silicon in advanced photovoltaic systems. Here, we describe modules that use large-scale arrays of silicon solar microcells created from bulk wafers and integrated in diverse spatial layouts on foreign substrates by transfer printing. The resulting devices can offer useful features, including high degrees of mechanical flexibility, user-definable transparency and ultrathin-form-factor microconcentrator designs. Detailed studies of the processes for creating and manipulating such microcells, together with theoretical and experimental investigations of the electrical, mechanical and optical characteristics of several types of module that incorporate them, illuminate the key aspects.

The properties and most successful methods for producing CuInSe2 films for solar-cell applications are reviewed and the production, analysis, and performance of photovoltaic devices based on CuInSe2 are discussed. The most successful methods for depositing thin CuInSe2 films for high-efficiency solar cells are three-source elemental evaporation and selenization of Cu/In layers in H2Se atmospheres. Devices based on CuInSe2 have achieved the highest conversion efficiencies for any nonepitaxial thin-film solar cell, 14.1% for a small cell and 10.4% (aperture efficiency) for a 3916-cm2 (4 sq. ft) device. Furthermore, high-efficiency devices have been produced by several groups and have shown no evidence of degradation of performance with time. The internal quantum efficiency is remarkably close to 100%, although various losses prevent making use of all of the generated carriers. The high performance results, in part, from the very-high-absorption coefficient of CuInSe2, which is of the order of 105 cm−1 for photons with energies slightly above 1 eV. Models of the operation of CuInSe2/CdS heterojunctions have begun to explain the processes limiting the device performance. The success of the models is based, in part, on the large amount of data which has accumulated on CuInSe2 in spite of the relatively short time it has been extensively studied.

No abstract

In May 2010 the United States National Science Foundation sponsored a two-day workshop to review the state-of-the-art and research challenges in photovoltaic (PV) manufacturing. This article summarizes the major conclusions and outcomes from this workshop, which was focused on identifying the science that needs to be done to help accelerate PV manufacturing. A significant portion of the article focuses on assessing the current status of and future opportunities in the major PV manufacturing technologies. These are solar cells based on crystalline silicon (c-Si), thin films of cadmium telluride (CdTe), thin films of copper indium gallium diselenide, and thin films of hydrogenated amorphous and nanocrystalline silicon. Current trends indicate that the cost per watt of c-Si and CdTe solar cells are being reduced to levels beyond the constraints commonly associated with these technologies. With a focus on TW/yr production capacity, the issue of material availability is discussed along with the emerging technologies of dye-sensitized solar cells and organic photovoltaics that are potentially less constrained by elemental abundance. Lastly, recommendations are made for research investment, with an emphasis on those areas that are expected to have cross-cutting impact.