Kayu adalah bahan yang umum digunakan baik secara struktural maupun non-struktural. Penggunaan kayu dalam bentuk struktural memerlukan spesifikasi tertentu. Kayu adalah bahan alami yang pertumbuhannya dipengaruhi oleh faktor lingkungan yang menyebabkan perbedaan kualitas kayu. Penelitian ini bertujuan untuk menguji dan memperoleh nilai kuat tekan sejajar serat kayu dan kuat geser kayu serta mengklasifikasikan kayu berdasarkan SNI 7973: 2013. Kayu tembusu (Fragraea fragrans) digunakan sebagai objek dalam penelitian ini. Hasil pengujian diperoleh nilai kuat tekan paralel kayu tembusu variasi A 16,31 MPa sehingga termasuk dalam kategori kayu dengan kode mutu E19. Nilai kuat tekan sejajar serat kayu kayu tembusu variasi B 16,26 MPa sehingga termasuk dalam kategori kayu dengan kode mutu E18. Modulus elastisitas kayu tembusu variasi A yang diperoleh adalah 3.555,95 MPa dan 5.324,24 MPa untuk variasi B. Nilai kuat geser kayu variasi A didapat sebesar 2,54 MPa dan untuk variasi B didapat 3,27 MPa. Penelitian ini bermanfaat untuk menganalisis kuat tekan sejajar serat, kuat geser kayu dan untuk penelitian lanjutan lainnya. Hasilnya diharapkan berkontribusi pada basis data ilmiah umum sifat mekanis kayu di Indonesia dan khususnya dalam desain komponen struktural tekan dan lentur serta untuk penelitian lebih lanjut.
Kayu adalah salah satu bahan bangunan yang sudah lama dikenal oleh masyarakat kita dan telah dipakai untuk berbagai keperluan, termasuk sebagai pendukung struktur bangunan. Tanaman yang memiliki nama latin Eusideroxylon zwageri Teijsm ini tergolong kedalam suku Lauraceae. kayu Ulin dikenal sebagai kayu kelas kuat I dan kelas awet I sehingga memiliki banyak manfaat dan sangat diminati masyarakat. Tujuan penelitian ini adalah mengkaji sifat sifik dan mekanik dari kayu Ulin tersebut sehingga bisa mendapatkan nilai modulus elastisitas lentur, kuat lentur, kuat tekan, kuat geser dan bisa di klasifikasikan berdasarkan SNI 7973:2013. Dalam penelitian ini terdapat dua variasi yaitu kuat tekan kering udara dan kering oven. Hasil yang didapat yaitu kuat tekan sejajar kayu Ulin lebih besar apabila kayu Ulin dalam keadaan kering oven daripada kering udara, dengan nilai kuat tekan sejajar serat kering oven 26,69 MPa dan kering udara 17,58 MPa. Sedangkan hasil kuat geser lebih besar kering udara daripada kering oven dengan nilai kering udara 3,04 MPa dan kering oven 2,81 MPa
Mint plants are generally grown on a small scale and are found growing wild in mountainous areas and in damp and watery places. This plant is able to adapt to tropical climates so that it can be cultivated. The purpose of this article is to provide counseling on how to cultivate mint leaves and use them as a fresh and healthy health drink at SMP IT Khazanah Boarding School. The method used is to provide counseling and practice it directly, how to cultivate and utilize mint plants as a fresh drink. Planting mint can be done by cutting existing plants. The trick is to cut the stalk about 1 cm above the branching. Then, remove some of the leaves on the stalks and submerge them in a container. Mint leaves have a distinctive spicy taste, fresh scent and have various benefits for the body, such as refreshing breathing, calming digestion, boosting immunity, and others. As for how to use it as a fresh drink for health which is combined with several ingredients such as Mint leaves, Lemons or Lime that have been cleaned, Honey or Sugar, and Hot Water. Then the lemons are cut into thin strips, then honey is added and the boiling hot water is poured into the container, then the mint leaves are dipped, and let stand for a moment so that the mint and lemon flavors are stronger then they can be served and drunk in warm conditions. The results obtained were that the teachers and students were very enthusiastic about participating in the community service activities carried out by the Riau University lecturer team from start to finish and almost all participants were excited to try planting, making drinks and enjoying fresh drinks from mint leaves.
The Soil and Water Assessment Tool (SWAT) model which is integrated with the Geographic Information System (GIS) can provide an overview or prediction of the influence of land management on the hydrology of the Micro Sei Tanduk watershed in accordance with the interests of evaluating and monitoring watershed management activities. The purpose of this study was to analyze the management of the Sei Tanduk Micro watershed based on land use patterns, as a basis for determining the best recommendations for planning and evaluating the Indragiri Rokan Watershed Management Project Activities for Fiscal Year 2003 by compiling a Master Plan for the Micro Sei Tanduk Watershed Master Plan Rumbio Village, Kampar Regency. The research method is to process primary and secondary data using a SWAT model that is integrated with GIS in analyzing hydrological characteristics in land use scenarios in the management of the Micro Sei Tanduk watershed, as a basis for providing recommendations. The best recommendation from the evaluation and analysis of the Micro Sei Tanduk watershed management based on land use patterns is scenario 2 in the form of applying agroforestry on mixed dry land agriculture with the insertion of forestry trees based on community participation in the Micro Sei Tanduk watershed, Rubio Village, Kampar District, Kampar Regency.
Pengujian kuat lentur dan kuat tekan kayu adalah pengujian yang didasarkan pada sifat-sifat mekanik kayu yaitu menahan tarikan dan tekanan. Hal ini bertujuan untuk mengetahui kelas kayu dan besar perubahan nilai kuat lentur dan kuat tekan kayu sengon solid dengan kayu sengon setelah diberi lapisan zat resin. Pada pengujian ini dilakukan tiga variasi yang berbeda dimana setiap pengujian kuat lentur dan kuat tekan yaitu, kuat lentur kayu solid, kuat lentur kayu coating dengan resin 1 lapis dan kuat lentur kayu coating resin 2 lapis. Begitu juga dengan pengujian kuat tekan dilakukan variasi yang sama serperti pengujian kuat lentur. Pada setiap pengujian ini diperoleh kelas kayu adalah kayu kelas III, dan persentase rata-rata kenaikan kuat lentur kayu coating resin 1 lapis adalah sebesar 17,97 MPa atau sekitar 0,4 % dari nilai kuat lentur kayu solid, sedangkan persentase rata-rata kenaikan kuat lentur kayu coating resin 2 lapis adalah sebesar 23,40 MPa atau sekitar 0,5 %. Dan untuk pengujian kuat tekan kayu coating resin 1 lapis mengalami penurunan sebesar 0,77 MPa, atau sekitar 0,02 % dari kuat tekan kayu solid, sedangkan pada pengujian kuat tekan kayu coating resin 2 lapis mengalami penurunan sebesar 1,53 MPa, atau sekitar 0,04 % dari nilai kuat tekan kayu solid.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.