No abstract

No abstract

A high-performance α-MoO3/multiwalled carbon nanotube (MWCNT) nanocomposite material is synthesized via a novel surfactant-assisted solvothermal process followed by low-temperature calcination. Its structure, composition, and morphology are characterized by X-ray diffraction, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, carbon element analysis, nitrogen adsorption-desorption determination, scanning electron microscopy, and transmission electron microscopy techniques. Its electrochemical performance as a high-capacity lithium-ion-battery anode material is investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic discharge/recharge methods. This composite material exhibits not only high capacity but also excellent rate capability and cyclability. For example, when the discharge/charge current density is increased from 0.1 to 2 A g(-1), the reversible charge capacity is only decreased from 1138.3 to 941.4 mAh g(-1), giving a capacity retention of 82.7%. Even if it is cycled at a high current density of 20 A g(-1), a reversible charge capacity of 490.2 mAh g(-1) is still retained, showing a capacity retention of 43.1%. When it is repeatedly cycled at a current of 0.5 A g(-1), the initial reversible charge capacity is 1041.1 mAh g(-1). A maximum charge capacity of 1392.2 mAh g(-1) is achieved at the 292th cycle. After 300 cycles, a high charge capacity of 1350.3 mAh g(-1) is maintained. Enhancement of the electrical conduction contributed by the MWCNT composite component as well as the loose and porous texture of the MoO3/MWCNT composite is suggested to be responsible for the excellent performance.

No abstract

In this work, highly conductive vapor grown carbon fiber (VGCF) was applied as an electrically conductive agent for facile synthesis of a nanoparticulate Mn3O4/VGCF composite material. This material exhibits super high specific capacity and excellent rate capability as a conversion-anode for lithium ion batteries. Rate performance test result demonstrates that at the discharge/charge current density of 0.2 A g(-1) a reversible capacity of ca. 950 mAh g(-1) is delivered, and when the current rate is increased to a high current density of 5 A g(-1), a reversible capacity of ca. 390 mAh g(-1) is retained. Cyclic performance examination conducted at the current density of 0.5 A g(-1) reveals that in the initial 20 cycles the reversible capacity decreases gradually from 855 to 747 mAh g(-1). However, since then, it increases gradually with cycle number increasing, and after 200 cycles an extraordinarily high reversible capacity of 1391 mAh g(-1) is achieved.