Background:The increased incidence of inflammatory diseases has necessitated the need to search for new topical dosage form of dexamethasone. Objectives: The purpose of the present study was the preparation and evaluation of novel microemulsion as a topical delivery system for dexamethasone by mixing appropriate amount of surfactant including Tween 80 and Labrasol, cosurfactant such as capryol 90 and oil phase including labrafac lipophile wl-transcutol P (10:1 ratio). Materials and Methods:The prepared microemulsions were evaluated regarding their particle size, zeta potential, X-Ray scattering, conductivity, stability, viscosity, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), refractory index (RI), pH, and x-ray diffraction (XRD). Results:The results showed that the maximum oil was incorporated in microemulsion system that contained surfactant to cosurfactant ratio of 4:1. The mean droplet size range of microemulsion formulation was in the range of 5.09 to 159 nm, and its refractory index (RI) and pH were 1.44 and 7, respectively. Viscosity range was 57-226 cps. Drug release profile showed that 48.18% of the drug released in the 24 hours of experiment. Also, Hexagonal, cubic and lamellar structures were seen in the SEM photograph and XRD peak of microemulsions. Conclusions: This study demonstrated that physicochemical properties and in vitro release were dependent upon the contents of S/C, water, and oil percentage in formulations. SAXS technique and SEM obtained important information about microstructure of microemulsions. W/O and bicontinuous microemulsion with different microstructures were found in formulations.

The aim of this study was to develop a new microemulsion formulation for topical application of poorly soluble drug named quercetin. In order to design suitable microemulsion system, the pseudo-ternary phase diagrams of microemulsion systems were constructed at different surfactant/co-surfactant ratios using tween 80 as surfactant, transcutol P as a co-surfactant and oleic acid as an oil phase. Some physicochemical properties such as droplet size, density, refractive index, electrical conductivity, pH, surface tension, and viscosity of the microemulsion systems were measured at 298.15 K. The average hydrodynamic droplet size of the optimized microemulsions was obtained by dynamic light scattering method. Morphology assessment of the optimized quercetin-loaded microemulsion by transmission electron microscopy analysis indicated that the particles have the size of about 25 nm and spherical with narrow size distribution. Equilibrium solubility, in vitro drug release at a 24 h time period, release kinetic evaluation as well as ex vivo permeation and retention of quercetin-loaded microemulsions through rat skin has been investigated. The obtained results showed a slow release behavior without any transdermal delivery. Most of the formulations fitted best with zero-order kinetic model with a non-Fickian mechanisms. This study illustrated that the proposed QU-microemulsion has a good potential for use in sunscreen formulations. [Formula: see text].

No abstract

No abstract

Background: Self-emulsifying drug delivery system is an isotropic mixture of natural or synthetic oils, non-ionic surfactants or, one or more hydrophilic solvent and co-solvents/surfactant and polymer that improve bioavailability and increase solubility of poorly-soluble drugs. Objectives: This study was aimed to prepare and develop a stable formulation for self-emulsifying drug delivery system to enhance the solubility, release rate, and oral absorption of the poorly-soluble drug, carvedilol. Materials and Methods:The prepared self-emulsifying drug delivery system formulations were evaluated regarding their particle size, refractory index (RI), emulsifying efficiency, drug release, and rat intestine permeability. Results:The results showed oleic acid as oil with Labrafil as surfactant and Labrafac PG (propylene glycol dicaprylocapraye) as cosurfactant with hydroxypropyl methylcellulose and Poloxamer as polymer prepared stable emulsions with a refractive index higher than acidic medium and water. The particle size of formulations was influenced by the type of polymer so that the mean particle size in the self-emulsifying drug delivery system formulations containing hydroxypropyl methylcellulose have a higher particle size compared to Poloxamer formulations. The percentage of drug release after 24 hours (R24) for Poloxamer and hydroxypropyl methylcellulose formulations were 61.24-70.61% and to 74.26-91.11%, respectively. The correlation between percentages of drug released after 24 hours with type of polymer was significant. In permeation studies, a significant and direct correlation existed between P4 and surfactant/cosurfactant ratio. The self-emulsifying drug delivery system formulations showed drug permeability through the rat intestine 2.76 times more, compared with the control. Conclusions: This study demonstrated that physicochemical properties, in vitro release and rat intestine permeability were dependent upon the contents of S/C, water and oil percentage in formulations.

No abstract

Purpose: Azelaic acid is a natural keratolytic, comedolytic, and antibacterial drug that is used to treat acne. The topical application of azelaic acid is associated with problems such as irritation and low permeability. For dissolving, the problem is that microemulsion (ME) is used as a drug carrier. The aim of this study was to increase the azelaic acid affinity in the follicular pathway through ME. Methods: Azelaic acid-loaded MEs were prepared by the water titration method. The properties of the MEs included formulation stability, particle size, drug release profile, thermal behavior of MEs, the diffusion coefficient of the MEs and skin permeability in the non-hairy ear skin and hairy abdominal skin of guinea pig were studied in situ. Results: The MEs demonstrated a mean droplet size between 5 to 150 nm. In the higher ratios of surfactant/co-surfactant, a more extensive ME zone was found. All MEs increased the azelaic acid flux through both hairy and non-hairy skin compared with an aqueous solution of azelaic acid as a control. This effect of the ME was mainly dependent on the droplet diffusion coefficient and hydrodynamic radius. MEs with a higher diffusion coefficient demonstrated higher azelaic acid flux through hairy and non-hairy skin. Drug flux through both skins was affected by the surfactant/co-surfactant ratio in that the higher ratio increased the azelaic acid affinity into the follicular pathway. Conclusion: Finally, the ME with the highest droplet diffusion coefficient and the lowest surfactant/co-surfactant ratio was the best ME for azelaic acid delivery into the follicular pathway.

Purpose: The objective of the present study is to formulate and evaluate a new microemulsion (ME) for topical delivery of griseofulvin. Methods: The solubilities of griseofulvin in different combinations of surfactant to co-surfactant (S/Co ratio) were determined. Accordingly, based on their phase diagrams, eight microemulsions were formulated and then evaluated with respect to their particle size, surface tension, viscosity, conductivity, zeta potential and stability. Their release behavior, Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), refractory index (RI), pH and Small-angle-X-ray scattering (SAXS) were also assessed. Results: The results indicated that the mean droplet size of the MEs ranged from 30.9 to 84.3 nm. Their zeta potential varied from -4.5 to -20.8. Other determined characteristics were viscosity: 254-381 cps, pH: 5.34-6.57, surface tension: 41.16- 42.83 dyne.cm-1, conductivity: 0.0442 – 0.111 ms.cm-1. The drug release was in the range of 22.4 to 43.69 percent. Also, hexagonal, cubic and lamellar liquid crystals were observed in SAXS experiments. Conclusion: It can be concluded that any alteration in MEs constituents directly affects their microstructure, shape, droplet size and their other physicochemical properties.