Dielectric spectroscopy (DS) is a noninvasive technique for real-time measurements of the impedance spectra of biological cells. DS enables characterization of cellular dielectric properties such as membrane capacitance and cytoplasmic conductivity. We have developed a lab-on-a-chip device that uses an electro-activated microwells array for capturing, DS measurements, and unloading of biological cells. Impedance measurements were conducted at 0.2 V in the 10 kHz to 40 MHz range with 6 s time resolution. An equivalent circuit model was developed to extract the cell membrane capacitance and cell cytoplasmic conductivity from the impedance spectra. A human prostate cancer cell line, PC-3, was used to evaluate the device performance. Suspension of PC-3 cells in low conductivity buffers (LCB) enhanced their dielectrophoretic trapping and impedance response. We report the time course of the variations in dielectric properties of PC-3 cells suspended in LCB and their response to sudden pH change from a pH of 7.3 to a pH of 5.8. Importantly, we demonstrated that our device enabled real-time measurements of dielectric properties of live cancer cells and allowed the assessment of the cellular response to variations in buffer conductivity and pH. These data support further development of this device toward single cell measurements.

Bone is an active organ that continuously undergoes an orchestrated process of remodeling throughout life. Bone tissue is uniquely capable of adapting to loading, hormonal, and other changes happening in the body, as well as repairing bone that becomes damaged to maintain tissue integrity. On the other hand, diseases such as osteoporosis and metastatic cancers disrupt normal bone homeostasis leading to compromised function. Historically, the ability to investigate processes related to either physiologic or diseased bone tissue is limited by traditional models that fail to emulate the complexity of native bone. Organ‐on‐a‐chip models are based on technological advances in tissue engineering and microfluidics, enabling the reproduction of key features specific to tissue microenvironments within a microfabricated device. Compared to conventional in vitro and in vivo bone models, microfluidic models, and especially organ‐on‐a‐chip platforms, provide more biomimetic tissue culture conditions, with increased predictive power for clinical assays. In this review, microfluidic and organ‐on‐a‐chip technologies designed for understanding the biology of bone as well as bone‐related diseases and treatments are reported. Finally, the authors discuss the limitations of the current models and point toward future directions for microfluidics and organ‐on‐a‐chip technologies in bone research.

Dielectric spectroscopy (DS) is a non-invasive, label-free, fast, and promising technique for measuring dielectric properties of biological cells in real time. We demonstrate a microchip that consists of electro-activated micro-well arrays for positive dielectrophoresis (pDEP) assisted cell capture, DS measurements, and negative dielectrophoresis (nDEP) driven cell unloading; thus, providing a high throughput cell analysis platform. To the best of our knowledge, this is the first microfluidic chip that combines electro-activated micro-wells and DS to analyze biological cells. Device performance is tested using Saccharomyces Cerevisiae (yeast) cells. DEP response of yeast cells is determined by measuring their Clausius-Mossotti (CM) factor using biophysical models in parallel plate micro-electrode geometry. This information is used to determine the excitation frequency to load and unload wells. Effect of yeast cells on the measured impedance spectrum was examined both experimentally and numerically. Good match between the numerical and experimental results establishes the potential use of the micro-chip device for extracting sub-cellular properties of biological cells in a rapid and non-expensive manner.

No abstract

Biomaterial scaffolds have served as the foundation of tissue engineering and regenerative medicine. However, scaffold systems are often difficult to scale in size or shape in order to fit defect‐specific dimensions, and thus provide only limited spatiotemporal control of therapeutic delivery and host tissue responses. Here, a lithography‐based 3D printing strategy is used to fabricate a novel miniaturized modular microcage scaffold system, which can be assembled and scaled manually with ease. Scalability is based on an intuitive concept of stacking modules, like conventional toy interlocking plastic blocks, allowing for literally thousands of potential geometric configurations, and without the need for specialized equipment. Moreover, the modular hollow‐microcage design allows each unit to be loaded with biologic cargo of different compositions, thus enabling controllable and easy patterning of therapeutics within the material in 3D. In summary, the concept of miniaturized microcage designs with such straight‐forward assembly and scalability, as well as controllable loading properties, is a flexible platform that can be extended to a wide range of materials for improved biological performance.

Dielectric spectroscopy is a nondestructive method to characterize dielectric properties by measuring impedance data over a frequency spectrum. This method has been widely used for various applications such as counting, sizing, and monitoring biological cells and particles. Recently, utilization of this method has been suggested in various stages of the drug discovery process due to low sample consumption and fast analysis time. In this study, we used a previously developed microfluidic system to confine single PC-3 cells in microwells using dielectrophoretic forces and perform the impedance measurements. PC-3 cells are treated with 100 μM Enzalutamide drug, and their impedance response is recorded until the cells are totally dead as predicted with viability tests. Four different approaches are used to analyze the impedance spectrum. Equivalent circuit modeling is used to extract the cell electrical properties as a function of time. Principal component analysis (PCA) is used to quantify cellular response to drug as a function of time. Single frequency measurements are conducted to observe how the cells respond over time. Finally, opacity ratio is defined as an additional quantification method. This device is capable of quantitatively measuring drug effects on biological cells and detecting cell death. The results show that the proposed microfluidic system has the potential to be used in early stages of the drug discovery process.

Electrode polarization (EP) is inevitable in high conductivity buffers at low AC frequencies due to the accumulation of free charges at the electrode/electrolyte interface. Electrode miniaturization increases EP effect on impedance measurements. In this paper, six gold planar (GP) electrodes having different diameters ( ) were used to investigate the size effect on EP with parallel plate electrode geometry. GP electrode surface was electrochemically deposited with gold nanostructures (GNs) to minimize the EP effect. Equivalent circuit model was used to attain electrode/electrolyte interfacial impedance. Constant phase element model was used to analyze the relation between the size and morphology of electrodes on EP. The surface morphology of gold nanostructured electrodes was examined using SEM, and the influence of different applied potential on the growth of GNs was elucidated with Nernst equilibrium condition. Surface roughness and wettability characteristics were examined performing surface roughness and contact angle measurements, respectively. The improvement of GNs deposited electrode performance was investigated by analytically generated Jurkat cell suspension spectra. The results show that the error in estimating the subcellular properties can be drastically reduced by using GNs deposited electrodes.

We report dielectrophoretic (DEP) assembly of biological cells and microparticles using platinum-black electrodeposited conductive textile fiber. The threedimensional conductive structures with high aspect ratios were found to facilitate high electric field regions, as revealed by scanning electron microscope characterization. The effective conducting area (A eff ) and its stability of thread electrodes were estimated using electrochemical methods. Potential of platinum black electrodeposited thread as 3-D electrodes for creating high gradient electrical field for dielectrophoretic assembly of microspheres and Saccharomyces cerevisiae (yeast cells) into 1D and two-dimensional structures over long ranges under the application of low voltages (4-10 V pp ) has been demonstrated. The formation of highly ordered pearl chains of microparticles using thread electrodes when subjected to dielectrophoresis (DEP) has been discussed in detail. Published by AIP Publishing.