Recent analysis of modern aggradational continental sedimentary basins reveals that sedimentation patterns are dominated by distributive fluvial systems (DFSs). The Salt Wash Member of the Late Jurassic Morrison Formation has previously been described as a fan-shaped fluvial system. This study characterizes facies variations across the Salt Wash DFS to quantitatively test predicted trends in conceptual DFS models. Notable proximal-to-distal trends include a change in total thickness of the fluvial succession from 174 m to 40 m, and an average grain size from coarse sand to silt, while the percentage of sand decreased from 70% in the proximal region to 8% in the distal region. The proportion of amalgamated channel-belt deposits decreased from 67% to 0%, while floodplain facies and lacustrine deposits increase (38% to 94% and 0.1% to 7% respectively). A downstream decrease in average channel-belt thickness (15 m to 3.8 m, from thickest to thinnest) and average story thickness (7.7 m to 2.3 m, from thickest to thinnest) is also recorded. Significant downstream changes in deposit architecture were also noted, with proximal regions dominated by stacked channel-belt deposits with a high degree of amalgamation. Distal deposits are dominated by floodplain muds and sheet sandstones and sparse ribbon channels, with little to no amalgamation of channel deposits. This study provides quantified information for an ancient DFSs with the aim of providing a dataset that can be used for objective comparison between different DFSs, as well as providing numerical data to aid resource exploration and modelling efforts.

No abstract

No abstract

Progradation is an important mechanism through which sedimentary systems fill sedimentary basins. Although a general progradational pattern is recognized in many basins, few studies have quantified system scale spatial changes in vertical trends that record fluvial system progradation. Here, we provide an assessment of the spatial distribution of vertical trends across the Salt Wash distributive fluvial system (DFS), in the Morrison Formation SW, USA. The vertical distribution of proximal, medial and distal facies, and channel belt proportion and thickness, are analysed at 25 sections across approximately 80 000 km 2 of a DFS that spanned approximately 100 000 km 2 . The stratigraphic signature of facies stacking patterns that record progradation varies depending on location within the basin. An abrupt and incomplete progradation succession dominates the proximal region, whereby proximal deposits directly overlie distal deposits. A more complete succession is preserved in the medial region of the DFS. The medial to distal region of the DFS are either simple aggradational successions, or display progradation of medial over distal facies. Spatial variations in facies successions patterns reflects preservation changes down the DFS. A spatial change in vertical trends of channel belt thickness and proportion is not observed. Vertical trends in channel belt proportion and thickness are locally highly variable, such that systematic up-section increases in these properties are observed only at a few select sites. Progradation can only be inferred once local trends are averaged out across the entire succession. Possible key controls on trends are discussed at both allocyclic and autocyclic scales including climate, tectonics, eustasy and avulsion. Eustatic controls are discounted, and it is suggested that progradation of the Salt Wash DFS is driven by upstream controls within the catchment.

Fluvial channel geometry classification schemes are commonly restricted in relation to the scale at which the study took place, often due to outcrop limitations or the need to conduct small‐scale detailed studies. A number of classification schemes are present in the literature; however, there is often limited consistency between them, making application difficult. The aim of this study is to address this key problem by describing channel body geometries across a depositional basin to ensure that a wide range of architectures are documented. This was achieved by studying 28 locations over 4000 m of vertical succession in Palaeocene‐aged and Early Eocene‐aged deposits within the Bighorn Basin, Wyoming, USA. Five different channel body geometries have been defined based on the external geometric form, and internal arrangement and nature of storey contacts. These include the massive channel body geometry, semi‐amalgamated channel body geometry, internally amalgamated channel body geometry and offset stacked channel body geometry, which are considered to be subdivisions of the sheet geometry of many other classifications. An isolated channel body geometry has also been recognized alongside splay channel and sheet sandstone geometries in the floodplain facies associations. Field evidence, including the stacking style of storey surfaces, suggests that the different geometries form a continuum. The nature and degree of amalgamation at the storey scale are important in producing the different geometries and are related to the degree of channel migration. It is speculated that this is the result of differences in sediment supply and available accommodation. In contrast to previous schemes, the classification scheme presented here recognizes the importance of transitional geometries. This geometrical range has been recognized because of the basin‐scale nature of the study.

Basin‐scale models are required to interpret ancient continental sedimentary successions, and reduce uncertainty in assessing geological resources in basins. Recently, modern studies show distributive fluvial systems to comprise a substantial proportion of modern sedimentary basins, but their role in ancient basin fills has yet to be quantitatively documented at the basin scale. This study analysed key fluvial characteristics to construct a detailed basin‐wide model of the Palaeogene Fort Union and Willwood formations (Bighorn Basin, Wyoming), using observations from modern studies, and ancient system scale studies of distributive fluvial systems, to guide interpretations. Mapping showed these formations to be highly heterogeneous with channel‐body proportion (from 12 to 81%) and geometry types (large amalgamated bodies to isolated channels), grain size (silt to conglomerate), average channel‐body thickness (4 to 20 m) and average storey thickness (3 to 10 m) varying significantly across the basin. Distributive fluvial systems in the form of alluvial and fluvial fans in transverse configurations were recognized as well as a wide axial system, with heterogeneity in the formations being closely aligned to these interpretations. Furthermore, numerous individual depositional systems were identified within the formations (Beartooth Absaroka, Washakie, Owl Creek and axial). Predicted downstream distributive fluvial system trends (i.e. downstream decrease in channel proportion, size and grain size) were identified in the Beartooth, Absaroka and Owl Creek systems. However, predicted trends were not identified in the Washakie system where intrabasinal thrusting disturbed the sequence. Importantly, a wide axial fluvial system was identified, where reverse downstream distributive fluvial system trends were present, interpreted to be the result of the input of transverse systems of variable size. This study provides a new level of detail in the application of basin‐scale models, demonstrating their usefulness in trying to understand and predict alluvial architecture distribution and heterogeneity, with important implications for economic resources and palaeogeographic reconstructions.

The development of a new standardised investigator-based interview, PACE (Psychosocial Assessment of Childhood Experiences), for the assessment of acute life events and long-term psychosocial experiences is described. An application of PACE to a sample of 84 children referred to psychiatric clinics and 22 general population controls, is presented. Reliability was assessed using a separate clinic sample of 15 child-parent pairs. The findings showed that PACE has satisfactory reliability and discriminant validity.

Meandering fluvial channels and their meander belts are common in modern continental sedimentary basins, yet compose a minor constituent of the reported fluvial rock record. Here we document exhumed amalgamated meander belt deposits from the upper Jurassic Morrison Formation, Utah (United States). The size of the amalgamated meander belt (9000 km 2 ) is significantly larger than any documented previously and comparable in size to those from modern sedimentary basins. We describe a representative outcrop of sandy point bar deposits that shows features considered characteristic of both braided and meandering fluvial systems. Lateral accretion sets compose <5% of the outcrop area, yet point bar morphology is clearly visible in plan view. We suggest that difficulties in the identification of sandy, amalgamated meander belt deposits indicate that they have gone largely unrecognized in the rock record. Their recognition has important implications for basin-scale reconstructions of fluvial systems and interpretation of tectonic setting.