Plasmonic immunosensors are usually made of a noble metal (in the form of a film or nanoparticles) on which bioreceptors are grafted to sense analytes based on the antibody/antigen or other affinity mechanism. Optical fiber configurations are a miniaturized counterpart to the bulky Kretschmann prism and allow easy light injection and remote operation. To excite a surface plasmon (SP), the core-guided light is locally outcoupled. Unclad optical fibers were the first configurations reported to this end. Among the different architectures able to bring light in contact with the surrounding medium, a great quantity of research is today being conducted on metal-coated fiber gratings photo-imprinted in the fiber core, as they provide modal features that enable SP generation at any wavelength, especially in the telecommunication window. They are perfectly suited for use with cost-effective high-resolution interrogators, allowing both a high sensitivity and a low limit of detection to be reached in immunosensing. This paper will review recent progress made in this field with different kinds of gratings: uniform, tilted and eccentric short-period gratings as well as long-period fiber gratings. Practical cases will be reported, showing that such sensors can be used in very small volumes of analytes and even possibly applied to in vivo diagnosis.

An aptasensor based on etched tilted fiber Bragg grating (eTFBG) is developed on a single-mode optical fiber targeting biomolecule detection. TFBGs were chemically etched using hydrofluoric acid (HF) to partially remove the fiber cladding. The sensor response was coarsely interrogated, resulting on a sensitivity increase from 1.25 nm/RIU (refractive index unit) at the beginning of the process, up to 23.38 nm/RIU at the end of the etching, for a RI range from 1.3418 to 1.4419 RIU. The proposed aptasensor showed improved RI sensitivity as compared to the unetched TFBG, without requiring metal depositions on the fiber surface or polarization control during the measurements. The proposed sensor was tested for the detection of thrombin-aptamer interactions based on silane-coupling surface chemistry, with thrombin concentrations ranging from 2.5 to 40 nM. Functionalized eTFBGs provided a competitive platform for biochemical interaction measurements, showing sensitivity values ranging from 2.3 to 3.3 p.m./nM for the particular case of thrombin detection.

No abstract

Gold-coated fiber Bragg gratings (FBGs) are nowadays a mature technology for lab-on-fiber sensing based on surface plasmon resonance (SPR) excitation. Tilted FBGs bring valuable assets such as easy light injection, remote operation in very small volumes of analytes and immunity to temperature fluctuations. Different gold configurations have been reported to date, without considering their relative performances in terms of biochemical sensing. In this work, we experimentally study the impact of the gold coating on the cladding mode distribution in the tilted FBG amplitude spectrum and subsequently on its sensitivity to cytokeratins used as biomarkers for cancer diagnosis. Some relevant configurations of gold coatings are produced and tested, relying on both the sputtering and electroless plating (ELP) processes. The obtained results confirm that the coating thickness and its roughness drive the biosensing performances. The experimental limit of detection for cytokeratins 17 sensing reaches 14 fM for the most sensitive configurations.

No abstract

No abstract

No abstract

No abstract