No abstract

No abstract

No abstract

No abstract

Effective impervious area (EIA), or the portion of total impervious area (TIA) that is hydraulically connected to the storm sewer system, is an important parameter in determining actual urban runoff. EIA has implications in watershed hydrology, water quality, environment, and ecosystem services. The overall goal of this study is to evaluate the application of successive weighted least square (WLS) method to urban catchments with different sizes and various hydrologic conditions to determine EIA fraction. Other objectives are to develop insights on the data selection issues, EIA fraction, EIA/TIA ratio, and runoff source area patterns in urban catchments. The successive WLS method is applied to 50 urban catchments with different sizes from less than 1 ha to more than 2000 ha in Minnesota, Wisconsin, Texas, USA as well as Europe, Canada, and Australia. The average, median, and standard deviation of EIA fractions for the 42 catchments with residential land uses are found to be 0.222, 0.200, and 0.113, respectively. These values for the EIA/TIA ratio in the same 42 catchments are 0.50, 0.48, and 0.21, respectively. While the EIA/TIA results indicate the importance of EIA, 95% prediction interval of the mean EIA/TIA is found to be 0.07 to 0.93, which shows that using an average value for this ratio in each land use to determine EIA from TIA in ungauged urban watersheds can be misleading. The successive WLS method was robust and is recommended for determining EIA in gauged urban catchments. Copyright © 2016 John Wiley & Sons, Ltd.

No abstract

Infiltration is the primary mechanism in green stormwater infrastructure (GSI) systems to reduce the runoff volume from urbanized areas. Soil hydraulic conductivity is most important in influencing GSI infiltration rates. Saturated hydraulic conductivity (Ksat) is a critical parameter for GSI design and post-construction performance. However, Ksat measurement in the field is problematic due to temporal and spatial variability and measurement errors. This review paper focuses on a comparison of methods for in-situ Ksat measurement and the causes of temporal and spatial variations of Ksat within GSI systems. Automated infiltration testing methods, such as the Modified Philip-Dunne (MPD) and SATURO infiltrometers, show promise for efficient Ksat measurements. Soil Ksat values can change over time and substantially vary throughout a GSI, which can be attributed to multiple factors, including but not limited to temperature changes, soil composition and properties, soil compaction level, plant root morphology and distribution, biological and macrofauna activities in the soil, inflow sediment characteristics, quality of infiltrating water, and measurement errors. There is evidence that infiltration rates in vegetated urban GSI systems are sustained given an appropriate GSI design, reasonable concentration of suspended sediments in the inflow runoff, and routine maintenance procedures.These observations indicate that clogging can be counteracted by processes that tend to increase the soil hydraulic conductivity (e.g., plant root and biological activities). This self-sustainability underlines that infiltration-based GSI systems are a reliable long-term stormwater management solution. Recommendations on how to incorporate the temporal changes of Ksat in GSI design and on obtaining a spatiallyrepresentative Ksat for the GSI design are presented. K E Y W O R D Sgreen infrastructure, hydraulic conductivity, infiltration, infiltrometer, saturated hydraulic conductivity, soil, stormwater, urban areas

No abstract