The in vitro antibacterial, anticancer, and antioxidant activities of a few plant extracts were widely known for decades, and they were used for application in the conventional way. Specifically, electrospun nanofibrous mats have recently exhibited great antibacterial, anticancer, and antioxidant activities. The herbal extracts infused into these formations are expected to have a more efficient and integrated effect on in vitro biological applications. The purpose of this study is to develop polycaprolactone- (PCL-) based nanofiber mats that are infused with a traditional plant extract using Clerodendrum phlomidis leaves to improve the synthesized nanofibers’ antibacterial, anticancer, and antioxidant efficacy. This study examined the morphology, thermal properties, mechanical properties, structure, and in vitro drug release studies of electrospun nanofibers. Antibacterial, anticancer, and antioxidant activities of the electrospun nanofibrous mats were also studied. The HRTEM and FESEM pictures of PCL and PCL-CPM nanofibers provide that smooth, defect-free, and homogeneous nanofibers were found to be 602.08 ± 75 nm and 414.15 ± 82 nm for PCL and PCL-CPM nanofibers, respectively. The presence of Clerodendrum phlomidis extract in the electrospun nanofibers was approved by UV-visible and FTIR spectroscopy. The incorporation of Clerodendrum phlomidis extract to nanofiber mats resulted in substantial antibacterial activity against bacterial cells. PCL-CPM mats exposed to oral cancer (HSC-3) and renal cell carcinoma (ACHN) cell lines displayed promising anticancer activity with less than 50% survival rate after 24 h of incubation. 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assay performed on PCL-CPM nanofibers revealed the antioxidant scavenging activity with maximum inhibition of 34% suggesting the role of the secondary metabolites release from scaffold. As a result, the findings of this study revealed that Clerodendrum phlomidis extract encapsulating PCL electrospun nanofibers has a high potential for usage as a biobased antibacterial, anticancer, and antioxidant agent.
Nonbiodegradable polymers constitute major pollution and their usage cannot be ignored due to their properties. Hybrid polymer composite research has increased in recent times due to improved characteristics and biodegradable nature. The effect of different stacking sequences containing pineapple/banana/basalt fiber has been studied in the present work to reduce the usage of synthetic fibers without compromising on properties. Hybrid composites were manufactured using the hand layup method and were assessed for mechanical and morphological characteristics. The results showed that several properties improved by keeping the pineapple layer in the skin layer. The adhesion between the matrix and the fiber played a vital role in determining the properties of the composites manufactured. Morphological studies have concluded that the proper bonding between the matrix and the fiber has enhanced several properties.
Tribological properties of the novel Borassus fruit fine fiber- (BFF-) reinforced polypropylene (PP) composites with respect to fiber matrix surface modifications have been described. Composites were fabricated by an injection molding process using Borassus fruit fine fiber (BFF) of 5 wt.% as reinforcement and polypropylene (PP) as a matrix component. Fibers were treated with alkali (T) to remove the residual lignin (if present) and to enhance the interfacial adhesion between the fiber/matrix interface. Alkali treatment reveals additional reactive functional groups here on the surface of the Borassus fiber, allowing effective interaction bonding with the polypropylene matrix. Borassus fibers are primarily treated with an alkali solution to extract weaker unstructured amorphous constituents so that the fibers retain crystallized components, thereby strengthening the fiber’s strength. A 5 wt.% of maleated polypropylene (MAPP) was used as a compatibilizer to improve the interfacial adhesion between fiber and the polymer matrix. The wear and frictional behavior of BFF/PP composites with respect to the modifications were evaluated by steel counterface utilizing pin-on-disc test contraption under dry-sliding conditions. The sliding velocity, applied load, and sliding distance were maintained as 2.198 m/s, 9.81–29.43 N, and 4000 m, respectively. The results demonstrate that the reinforcement of BFF to polypropylene matrix and the modifications improved the wear properties of the neat polymer matrix. Findings concluded that the abrasive wear resistance of T + PP + MAPP composite showed better interfacial adhesion and bonding, thus resulting in better tribological performance as compared to the other three compositions under different loading conditions. The effective substantial improvement of the coefficient of friction has been observed in alkali-treated fiber and polypropylene matrix with MAPP compatibilizer (T + PP + MAPP) composites due to the presence of MAPP compatibilizer and alkali-treated fibers. The frictional coefficient of T + PP + MAPP possesses better interfacial bonding strength upon NaOH treatment, and coupling agent, which results in enhancement of effective contact surface area and good surface friction characteristics, has been observed under different loading conditions. The fracture mechanism of worn-out portions of BFF/PP composites was studied using high-resolution scanning electron microscopy to analyze various imperfections like debonding, splits, fiber cracks, and wreckage or fragments formation.
This research aims to increase the utility of globally and abundantly available waste natural fibres of Gallus-Gallus fibres coir waste from mattress and car seat manufacturing factories. The composite samples were prepared with a rally round of polyester resin of grade GP500 bio-epoxy by synthesizing specially treated Gallus-Gallus fibres selectively used for reinforcement and characterizing them through static and dynamic mechanical analyses to identify their wide range of applicability. The Gallus-Gallus fibres are preprocessed with sodium oxidative and a half per cent of potassium manganate (VII) chemical solution. The selective use includes 5 mm, 10 mm, 15 mm, and 20 mm length of the Gallus-Gallus fibre, and the quantity of reinforcement was 10%, 20%, and 30%. Five alternate layers of matrix and fibres, with vertical and horizontal orientation, are considered; 12 different samples of Gallus-Gallus fibres reinforced polyester polymer composites and a neat polyester composites were synthesized and characterized for moisture absorbability, tensile strength, tensile modulus, flexural strength, flexural modulus, wear resistance, and outperformed composites were included in microscopic examination and dynamic Mmchanical analysis. The interesting results are the preferred resin, supported for good surface finish, interface bonding, and totally in the enhancement of Composite properties. The composites are strong in tension (760.89 MPa) and sufficiently flexible (flexural modulus 5441.32 MPa), absorbed less moisture (5.8 g), high wear-resistant (least weight loss upon abrasion with a value of 0.1989 g), secured good results in dynamic analysis, and ensured homogeneous distribution of fibres in the matrix through a scanning electron microscopy image. The composites CPPC10, CPPC11, and CPPC12 performed well but composite CPPC12 outperformed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.