No abstract

In the present study, wetting behaviors of Sn-9Zn-xAl ternary lead-free solder alloys produced by the addition of Al in various amounts binary Sn-9Zn eutectic lead-free solder alloy (wt%) were investigated. Contact angles of alloys were measured by using of the sessile drop method. Microstructures, inter-metallic phases, and melting temperatures of alloys were characterized by optic microscope and scanning electron microscope and energy dispersive X-ray spectroscopy, X-ray diffraction, and differential scanning calorimeter, and effects of the amount of Al on microstructure were investigated. As a result, the studies show that Al-rich areas were found on microstructure of Sn-9Zn-xAl alloys. The lowest melting temperature for Sn-9Zn-0.5Al and Sn-9Zn-0.7Al alloys was determined as 200.9• C. It was determined that wetting capability of Sn-9Zn-xAl alloys failed because of oxidation.

The improvement in the hardness of Sn-3.0Ag-0.5Cu solder alloy reinforced with 1.0 wt. % TiO2 nanoparticles was evaluated by nanoindentation. A specific indentation array was performed on four different horizontal cross sections of the composite solder with different heights and diameters, in order to verify the mixing homogeneity of TiO2 nanoparticles within the Sn-3.0Ag-0.5Cu solder paste during the ball milling process. The phase analysis indicated successful blending of the Sn-3.0Ag-0.5Cu with the TiO2 nanoparticles. According the scanning electron microscopy micrographs, presence of the TiO2 nanoparticles reduced the size of the Cu6Sn5 and Ag3Sn intermetallic compound phases. Incorporation of the 1.0 wt. % TiO2 nanoparticles improved the hardness values up to 26.2 % than that of pure SAC305. The hardness values increased gradually from the top cross sections towards adjacent to the solder/substrate interface. The mechanism of the hardness improvement attained by the TiO2 nanoparticles addition were also investigated on the horizontal cross sections of the samples.

Purpose This paper aims to invastigate of the wetting and interfacial properties of Sn-(3-x)Ag-0.5Cu-(x)Bi (x = 0.5, 1 and 2 in Wt.%) Pb-free solder alloys at various temperatures ( 250, 280 and 310°C) on Cu substrate in Ar atmosphere. Design/methodology/approach In this study, new Sn-(3-x)Ag-0.5Cu-xBi systems, low Ag content quaternary lead-free solder alloys, were produced by adding 0.5, 1 and 2% Bi to the near-eutectic SAC305 alloy. The wetting angles of three new alloys, Sn-2.5Ag-0.5Cu-0.5 Bi(SAC-0.5 Bi), Sn-2Ag-0.5Cu-1Bi(SAC-1Bi) and Sn-1Ag-0.5Cu-2Bi(SAC-2Bi) were measured by sessile drop technique on the Cu substrate in argon atmosphere. Findings In accordance with the interfacial analyses, intermetallic compounds of Cu3Sn, Cu6Sn5, and Ag3Sn were detected at the SAC-Bi/Cu interface. The results of wetting tests show that the addition of 1 Wt.% Bi improves the wetting properties of the Sn-3Ag-0.5Cu solder. The lowest wetting angle (θ) was obtained as 35,34° for Sn-2Ag-0.5Cu-1Bi alloy at a temperature of 310 °C. Originality/value This work was carried out with our handmade experiment set and the production of the quaternary lead-free solder alloy used in wetting tests belongs to us. Experiments were conducted using the sessile drop method in accordance with wetting tests.

No abstract