Objective: Healthcare workers in general are at a high risk of potential infections with COVID-19, especially those who work with aerosol generating procedures. Dentists fall in this category, as not only do they operate with aerosol generating procedures but also operate within a face-to-face contact area. Methods: A structured self-administered questionnaire was developed at Najran University and provided to the participants for data collection. The data collected included information on risk perception and incorporation of measures for protection against COVID-19 to gauge the attitude of dentists during this period. Also, clinical implementation of various protective measures was reviewed. Results: Of the n = 322 dentists that answered the questions, 50% were general dentists and 28.9% were dentists working at specialist clinics, while the remaining 21.1% of dentists were employed in academic institutions. Among the newer additions to the clinic, 36.3% of dentists answered that they had added atomizers to their practices, followed by 26.4% of dentists that had incorporated the use of UV lamps for sterilization. We found that 18.9% dentists were using HEPA filters in their clinics, while 9.9% of dentists were making use of fumigation devices to control the risk of infection. One-way ANOVA was also carried out to demonstrate that there was a statistically significant difference (p = 0.049) between groups of dentists utilizing HEPA filters, UV lamps, atomizers, and fumigation devices to prevent the spread of SARS-CoV2 across their workplaces. Conclusion: Dentists are aware of recently updated knowledge about the modes of transmission of COVID-19 and the recommended infection control measures in dental settings. A better understanding of the situation and methods to prevent it will ensure that the dental community is able to provide healthcare services to patients during the pandemic.

ObjectiveMicrobial aggregation around dental implants can lead to loss/loosening of the implants. This study was aimed at surface treating titanium microimplants with silver nanoparticles (AgNPs) to achieve antibacterial properties.MethodsAgNP-modified titanium microimplants (Ti-nAg) were prepared using two methods. The first method involved coating the microimplants with regular AgNPs (Ti-AgNP) and the second involved coating them with a AgNP-coated biopolymer (Ti-BP-AgNP). The topologies, microstructures, and chemical compositions of the surfaces of the Ti-nAg were characterized by scanning electron microscopy (SEM) equipped with energy-dispersive spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Disk diffusion tests using Streptococcus mutans, Streptococcus sanguinis, and Aggregatibacter actinomycetemcomitans were performed to test the antibacterial activity of the Ti-nAg microimplants.ResultsSEM revealed that only a meager amount of AgNPs was sparsely deposited on the Ti-AgNP surface with the first method, while a layer of AgNP-coated biopolymer extended along the Ti-BP-AgNP surface in the second method. The diameters of the coated nanoparticles were in the range of 10 to 30 nm. EDS revealed 1.05 atomic % of Ag on the surface of the Ti-AgNP and an astounding 21.2 atomic % on the surface of the Ti-BP-AgNP. XPS confirmed the metallic state of silver on the Ti-BP-AgNP surface. After 24 hours of incubation, clear zones of inhibition were seen around the Ti-BP-AgNP microimplants in all three test bacterial culture plates, whereas no antibacterial effect was observed with the Ti-AgNP microimplants.ConclusionsTitanium microimplants modified with Ti-BP-AgNP exhibit excellent antibacterial properties, making them a promising implantable biomaterial.

No abstract

Objective: The aim of this study was to translate and evaluate the validity and reliability of the Impact of Events Scale-Revised (IES-R) among the Iranian general population during the coronavirus disease 2019 (COVID-19) pandemic.Method: This study was methodological cross-sectional. It was conducted on an Iranian public population from April to July 2020 which was during the COVID-19 pandemic. Construct validity was determined through exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) with a total of 500 adults recruited via online data gathering. Reliability was checked through the average inter-item correlation (AIC), Cronbach's alpha, and McDonald's omega. Convergent and divergent validity was determined using Fornell and Larcker's approach.Results: The results showed that the Persian version of IES-R had three factors, including intrusion (six items), avoidance (seven items), and hyperarousal (five items), that explained 59.22% of the total variance of the IES-R. The CFA findings indicated that all goodness-of-fit indices confirmed the model fit. The Cronbach's alpha, McDonald's omega, composite reliability (CR), and maximal reliability were excellent, and the three factors have good convergent validity.Conclusion: The findings of this study indicated that the Persian version of the IES-R scale is efficient and useful to assess post-traumatic stress disorder among Iran general population in the COVID-19 outbreak.

Background. Citation analysis has emerged to play a significant role in recognition of the most useful areas of research. Endodontic microbiology has been a topic of interest for endodontists as well as periodontists and oral surgeons. This bibliometric analysis is aimed at identifying and reporting the characteristics of the top 50 cited articles on endodontic microbiology. Methods. The articles were identified through a search on Web of Science (WoS), property of Clarivate Analytics database published on endodontic microbiology. The citation information of the selected articles was recorded. The Journal of Endodontics, International Endodontic Journal, Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, Dental Traumatology, and Australian Endodontic Journal were searched in the search title. Descriptive and bivariate analyses were performed using a statistical software package SPSS. Statistical analysis was performed using Shapiro-Wilk, Kruskal-Wallis, Post hoc, Mann-Kendall trend, and Spearman-rank tests. Results. The 50 most cited articles were published from 1965 to 2012 with citation count varying from 1065 to 103 times. The total citation counts of articles recorded were 11,525 (WoS), 12,602 (Elseviers’ Scopus), and 28,871 (Google Scholar). The most prolific years in terms of publications were 2001, 2002, and 2003, with five publications each, followed by 2005 with four. The year with most citations was 1998, with 1,330 citations, followed by 1965 and 2001, with 1,065 and 1,015 citations, respectively. A total of 136 authors contributed to the top 50 most cited articles with 27 corresponding institutions from 12 different countries. The most common methodological design was in vitro study, followed by clinic-laboratory study, literature review, systematic review and meta-analysis, and animal study. Conclusions. The present study provided a detailed list of the top 50 most cited and classic articles on microbiology in endodontics. This will help researchers, students, and clinicians in the field of endodontics as an impressive source of information.

To investigate whether the craniofacial sagittal jaw relationship in patients with non-syndromic cleft differed from non-cleft (NC) individuals by artificial intelligence (A.I.)-driven lateral cephalometric (Late. Ceph.) analysis. The study group comprised 123 subjects with different types of clefts including 29 = BCLP (bilateral cleft lip and palate), 41 = UCLP (unilateral cleft lip and palate), 9 = UCLA (unilateral cleft lip and alveolus), 13 = UCL (unilateral cleft lip) and NC = 31. The mean age was 14.77 years. SNA, SNB, ANB angle and Wits appraisal was measured in lateral cephalogram using a new innovative A.I driven Webceph software. Two-way ANOVA and multiple-comparison statistics tests were applied to see the differences between gender and among different types of clefts vs. NC individuals. A significant decrease (p < 0.005) in SNA, ANB, Wits appraisal was observed in different types of clefts vs. NC individuals. SNB (p > 0.005) showed insignificant variables in relation to type of clefts. No significant difference was also found in terms of gender in relation to any type of clefts and NC group. The present study advocates a decrease in sagittal development (SNA, ANB and Wits appraisal) in different types of cleft compared to NC individuals.

The last decade (2010-2021) has witnessed the evolution of robotic applications in orthodontics. This review scopes and analyzes published orthodontic literature in eight different domains: (1) robotic dental assistants; (2) robotics in diagnosis and simulation of orthodontic problems; (3) robotics in orthodontic patient education, teaching, and training; (4) wire bending and customized appliance robotics; (5) nanorobots/microrobots for acceleration of tooth movement and for remote monitoring; (6) robotics in maxillofacial surgeries and implant placement; (7) automated aligner production robotics; and (8) TMD rehabilitative robotics. A total of 1,150 records were searched, of which 124 potentially relevant articles were retrieved in full. 87 studies met the selection criteria following screening and were included in the scoping review. The review found that studies pertaining to arch wire bending and customized appliance robots, simulative robots for diagnosis, and surgical robots have been important areas of research in the last decade (32%, 22%, and 16%). Rehabilitative robots and nanorobots are quite promising and have been considerably reported in the orthodontic literature (13%, 9%). On the other hand, assistive robots, automated aligner production robots, and patient robots need more scientific data to be gathered in the future (1%, 1%, and 6%). Technological readiness of different robotic applications in orthodontics was further assessed. The presented eight domains of robotic technologies were assigned to an estimated technological readiness level according to the information given in the publications. Wire bending robots, TMD robots, nanorobots, and aligner production robots have reached the highest levels of technological readiness: 9; diagnostic robots and patient robots reached level 7, whereas surgical robots and assistive robots reached lower levels of readiness: 4 and 3, respectively.

Periodontitis is an inflammatory condition of the soft and hard tooth-supporting tissues, representing the first cause of tooth loss. In addition to standard mechanical debridement (Scaling and Root Planing, SRP), further approaches have been proposed as adjuncts. The aim of the present randomized clinical trial is to compare the efficacy of ozone or photobiomodulation (PBM) therapy in addition to SRP to treat periodontal disease. According to a split-mouth design, 240 pathological sites, corresponding to 30 periodontal patients, were randomly divided according to the professional oral hygiene protocol performed at baseline (T0) and after 1 (T1), 2 (T2), 3 (T3), 4 (T4), 5 (T5), and 6 (T6) months. A total of 120 sites underwent an ozonized water administration (ozone group), whereas the other 120 sites were treated with photobiomodulation (PBM group), both in addition to SRP. At every timepoint, the following clinical indexes were assessed: Probing Pocket Depth (PPD) (measured on six sites per element), Plaque Index (PI), and Bleeding on Probing (BOP). As regards PPD, significant intergroup differences were noticed from T5, with significantly lower values in the PBM group (p < 0.05), where values further decreased at T6 (p < 0.05). Both PI and BoP generally decreased from baseline to T6 in both groups; a significant difference was found between T0 and T1 among the groups (p < 0.05), with a progressively higher reduction in the PBM group among the time frames of the study, despite intergroup comparisons not being significant (p > 0.05). Both ozone and PBM appear to be effective adjuvant treatments to SRP, obtaining a slightly better outcome for the latter in the long term, with significant differences at T5 and T6 for PPD. However, because of the absence of standardized protocols for PBM considering both therapeutic and research purposes, no definitive conclusions can be reached, and further studies are required.