<span lang="EN-US">The most important benefit of solar energy is renewable and low pollutant source of energy (clean energy). Solar energy technology and research are developing fast and much of the technology needed for these applications in industry and agricultures is already available. Solar drying technology (SDT) is one of the most attractive and promising applications of solar energy technology. In this paper, the various performances of SDTs in Indonesia are summarized with details. Generally, the cabinet-type and tunnel-type SDTs are remarkably well suited to drying small quantities of vegetables and fruit on the household scale. Greenhouse and hybrid SDTs are suitable for use on a large scale by industries.</span>
<span lang="EN-US">Growing concern with regard to energy sources and their usage has consequently increased significance of photovoltaic thermal (PV/T) collectors. A PV/T air collector is a system which has a conventional PV system combined with a thermal collector system. The system is able to produce electrical energy directly converted from sunlight by using photoelectric effect. Meanwhile, it also extracts heat from the PV and warms the fluid (air flow) inside the collector. In this review, solar PV system and solar thermal collectors are presented. In addition, studies conducted on solar PV/T air collectors are reviewed. The development of PV/T air collectors is a very promising area of research. PV/T air collectors using in solar drying and solar air heater.</span>
<span lang="EN-US">Photovoltaic thermal (PVT) collectors convert solar radiation directly to both electrical and thermal energies. A PVT collector basiccaly combines the functions of a flat plate solar collector and those of a PV panel. This review presents thermodinamics fundamentals, descriptions, and previous works conducted on energy and exergy analysis of air based PVT collector. Studies in 2010 to 2018 of the energy and exergy analysis of air based PVT collectors are summarized. The energy and exergy efficiency of air based PVT collector ranges from 31% to 94% and 8.7% to 18%, respectively. In addition, flat plate solar collector is presented. Studies conducted on air based PVT collectors are reviewed.</span>
The popular solar technology is the integration of solar thermal technology and photovoltaic (PV), called photovoltaic thermal (PVT) technology. This technology converts solar energy to electrical and thermal energy. The efficiency of solar energy conversion via PVT is higher than photovoltaic and solar systems. PV cell efficiency decreases if system operating temperature is higher. Therefore, solar systems attached to PV cells act to cool PV cells and increase the overall efficiency of the PVT system. PVT construction that saves space, is suitable for domestic consumption, and long-term saving costs makes PVT current research by researchers in the latest energy technology. This review presents descriptions and previous works conducted on performances analysis of PVT water collector. Results on the performances of PVT water collectors are summarized. The energy and exergy efficiency of PVT water collector ranges from 28.5% to 85% and 6.8% to 14%, respectively.
Biomass is a suitable alternative to be used as fuel, but the use of biomass without prior processing can cause respiratory disease. In Indragiri Hilir Regency, the utilization of palm fruit skin waste is still minimal. Bio-pellet is a fuel derived from biomass waste that has gone through a densification process. The process of making bio-pellets is carried out by refining the raw materials, mixing the adhesives, printing the raw materials that are pressed under high pressure, and drying. The results of the research on the bio-pellet characteristic test of Nipah fruit peel waste according to its parameters obtained an average value of 1.28% water content, 0.51% ash content, 21.3% flying substance content, 76.88% bound carbon content and weight. type 1.41 gr / cm3. For the combustion test in the updraft type gasification furnace with the addition of 0.5kg, 0.3kg and 0.2kg of fuel, the results obtained from the rate of fuel consumption are 0.041kg / minute, 0.033kg / minute and 0.033kg respectively. /minute. In the results of combustion efficiency, the value according to SNI 7926: 2013 is the addition of 0.5kg of fuel at the beginning of ignition and 0.2 kg at the end of ignition, which is 0.04.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.