Detailed testing of a new two‐dimensional hydraulic modelling system is presented. The methodology consists of applying the hydraulic model to a set of theoretical tests, for which analytical solutions are known, and then comparing a model simulation with a real flood event. The water‐at‐rest test, three dam‐break tests and the Seiche test constitute the set of tests with analytic solutions. The flood event is the Boscastle 2004 flood, for which observed water levels are available. The model yields results that compare closely with the analytical solutions in all of the tests, except for the Seiche test. When applied to the real flood event, the simulated maximum levels are close to the observed levels. Comparisons with two similar commercial software packages show similar results between the models.

No abstract

A significant amount of effort is being directed towards finding ways to improve the management of urban drainage to reduce flooding. It is recognized that an integrated modelling approach is required, linking rivers and their floodplains with surface water and foul drainage systems. As a result of this, flood inundation modelling methods are starting to converge. The existing 1D InfoWorks software has recently been enhanced to include a 2D flood modelling capability. This 2D hydrodynamic modelling software incorporates links with the already existing 1D software for rivers (InfoWorks RS) and network systems (InfoWorks CS). This paper describes the results of a series of analytical tests used to validate the robustness of the new 2D modelling engine, results of its application to a real case study and, in some cases, comparisons of the results with other 2D flood models.

Abstract.A Technical Assistance project funded by the European Investment Bank has been undertaken to develop a programme of flood risk management measures for Moldova that will address the main shortcomings in the present flood management system, and provide the basis for long-term improvement. Areas of significant flood risk were identified using national hydraulic and flood risk modelling, and flood hazard and flood risk maps were then prepared for these high risk areas. The flood risk was calculated using 12 indicators representing social, economic and environmental impacts of flooding. Indicator values were combined to provide overall estimates of flood risk. Strategic approaches to flood risk management were identified for each river basin using a multi-criteria analysis. Measures were then identified to achieve the strategic approaches. A programme of measures covering a 20-year period was developed together with a more detailed Short-Term Investment Plan covering the first seven years of the programme. Arrangements are now being made to implement the programme. The technical achievements of the project included national hydrological and hydraulic modelling covering 12,000 km of river, the development of 2-dimensional channel and floodplain hydraulic models from a range of topographic and bathymetric data, and an integrated flood risk assessment that takes account of both economic and non-monetary impacts.

Abstract.A Technical Assistance project funded by the European Investment Bank has been undertaken to develop a programme of flood risk management measures for Moldova that will address the main shortcomings in the present flood management system, and provide the basis for long-term improvement. Areas of significant flood risk were identified using national hydraulic and flood risk modelling, and flood hazard and flood risk maps were then prepared for these high risk areas. The flood risk was calculated using 12 indicators representing social, economic and environmental impacts of flooding. Indicator values were combined to provide overall estimates of flood risk. Strategic approaches to flood risk management were identified for each river basin using a multi-criteria analysis. Measures were then identified to achieve the strategic approaches. A programme of measures covering a 20-year period was developed together with a more detailed Short-Term Investment Plan covering the first seven years of the programme. Arrangements are now being made to implement the programme. The technical achievements of the project included national hydrological and hydraulic modelling covering 12,000 km of river, the development of 2-dimensional channel and floodplain hydraulic models from a range of topographic and bathymetric data, and an integrated flood risk assessment that takes account of both economic and non-monetary impacts.