The current state of investigations of the problem of providing first mirrors (FMs) for diagnostic systems in a reactor-grade fusion device is summarized. Results obtained in simulation experiments that have been conducted during recent years in several laboratories are presented. Attention is concentrated on two processes that can have an opposite effect but both can lead to degradation of mirror optical properties, namely: sputtering by charge exchange atoms which leads to erosion, and deposition which leads to surface contamination. It is shown in the analysis that when sputtering dominates, mirrors of monocrystalline refractory metals (Mo, W) can have a sufficiently long lifetime even for FMs that have to be located close to the first wall. Similarly, films of low sputtering yield metals on high thermal conductivity substrates (e.g., Rh on Cu) can be used for FMs in locations where the charge exchange flux is reduced to about a tenth of that at the first wall. However, deposition poses a serious threat to the lifetime of FMs but more modeling and experimental investigations are necessary before quantitative conclusions can be reached. Some mitigation methods are possible and these are briefly discussed.

No abstract

No abstract

We present the results of simulation experiments on the effect of the fusion reactor environment on the optical properties of the first mirrors for spectroscopy and laser diagnostics. We found the greatest effect on the degradation of mirror optical properties was due to charge exchange atoms. These atoms can affect mirror quality in two ways: by sputtering and by redeposition of material sputtered from other inner components of the vacuum chamber. The degradation rates of mirrors made of different metals and subjected to long-term bombardment by ions from hydrogen or deuterium plasmas are compared. From analysis of all data, we concluded that special experiments will have to be conducted in order to make a correct choice of a first mirror material. These tests should include the following: (1) study the role of swelling on mirror surface modification; (2) find the multimillion shot laser-induced-damage threshold of metal mirrors; and (3) develop and test methods to protect the first mirrors from redeposition. In addition, a model should be developed for the charge exchange atom flux and energy distribution that represents real data from operating tokamaks.

No abstract

No abstract

No abstract

No abstract