Weathering characteristics of impregnated and coated Calabrian pine wood

Abstract

This study was designed to investigate the weathering characteristics of Calabrian pine (Pinus brutia) wood. The wood specimens were impregnated with some copper-based chemicals and then varnish coated. As copper-based chemicals, Celcure C4, Korasit KS, and Tanalith E 8000 were used for impregnation. Polyurethane varnish (PV) and water-based varnish (WBV) were used as coating materials. Firstly, Calabrian pine wood was impregnated with 2,5 % and 5 % aqueous solutions of chemicals then coated with PV and WBV. Impregnated and coated Calabrian pine wood specimens were subjected to 6 months of natural weathering in Muğla, Turkey. After weathering, surface hardness, surface roughness, and adhesion strength changes of Calabrian pine wood specimens were determined. Impregnation caused to increase in surface hardness values of Calabrian pine. Surface hardness increases of WBV coated Calabrian pine specimens were higher than that of PV coated Calabrian pine specimens. Impregnation resulted in higher surface roughness values of Calabrian pine specimens. PV coated Calabrian pine specimens gave higher surface roughness than that of WBV coated Calabrian pine specimens. The adhesion strength values of all treatment groups were decreased after

Bakır esaslı kimyasal (Korasit KS) ile emprenye edilen ağaç malzemenin doğal yaşlandırma sonrası üst yüzey özellikleri

“…According to the results, higher surface roughness values were determined in the impregnated wood samples. Results from our study byAyrilmis et al (2006) andBaysal et al (2021) is consistent with the results. The graphical representation of the surface roughness test values after weathering is shown in Figure4.…”