The aim of this study was to investigate effects of natural weathering on color stability of Scots pine (Pinus sylvestrisL.) and Oriental beech (Fagus orientalisL.) impregnated with some chemicals [tanalith-E (TN-E), adolit-KD5 (AD-KD5), and chromated copper arsenate (CCA)] and then varnished [synthetic varnish (SV) and polyurethane varnish (PV)]. While applying varnish increased lightness, impregnation decreased lightness of the wood specimens before natural weathering. Natural weathering caused greenish, bluish, and dark color tones of the wood surface. Total color change was increased with increasing exposure times in natural weathering. Untreated (control) wood specimens exhibited higher color changes than the other wood specimens in all the stages of natural weathering. The total color changes of untreated Oriental beech specimens were less than untreated Scots pine specimens. The color stability of impregnated and varnished wood specimens gave better results than untreated and solely varnished wood specimens after natural weathering. The best color stability was obtained from both Oriental beech and Scots pine wood impregnated with TN-E before PV coating.

Context Maintaining functional green infrastructures (GIs) require evidence-based knowledge about historic and current states and trends of representative land cover types. Objectives We address: (1) the long-term loss and transformation of potential natural forest vegetation; (2) the effects of site productivity on permanent forest loss and emergence of traditional cultural landscapes; (3) the current management intensity; and (4) the social-ecological contexts conducive to GI maintenance . Methods We selected 16 case study regions, each with a local hotspot landscape, ranging from intact forest landscapes, via contiguous and fragmented forest covers, to severe forest loss. Quantitative open access data were used to estimate (i) the historic change and (ii) transformation of land covers, and (iii) compare the forest canopy loss from 2000 to 2018. Qualitative narratives about each hotspot landscape were analysed for similarities (iv). Results While the potential natural forest vegetation cover in the 16 case study regions had a mean of 86%, historically it has been reduced to 34%. Higher site productivity coincided with transformation to non-forest land covers. The mean annual forest canopy loss for 2000–2018 ranged from 0.01 to 1.08%. The 16 case studies represented five distinct social-ecological contexts (1) radical transformation of landscapes, (2) abuse of protected area concepts, (3) ancient cultural landscapes (4) multi-functional forests, and (5) intensive even-aged forest management, of which 1 and 4 was most common. Conclusions GIs encompass both forest naturalness and traditional cultural landscapes. Our review of Pan-European regions and landscapes revealed similarities in seemingly different contexts, which can support knowledge production and learning about how to sustain GIs.

No abstract

Wood is widely used as a construction material for many applications. To have knowledge about the thermal degradation characteristic of wood could be crucial for indoor and outdoor applications. Chemical treatments could improve the resistance of wood against fire and heat. In this study, to investigate the thermal properties of Oriental beech (Fagus orientalis) wood treated with 0,25%; 1% and 4,70% aqueous solutions of boric acid, borax, disodium octaborate tetrahydrate and mixtures of and in different proportions, thermogravimetric analysis, differential-thermogravimetry, and differentialthermal analysis were performed.Our results showed that borate treatment decreased the T max (maximum degradation temperature) and increased residual char amount. Higher concentration levels of borates resulted in higher char content of Oriental beech wood specimens. Residual char content of borate treated wood samples at fixed concentration of 4,70% ranked as in the following order: disodium octaborate tetrahydrate > boric acid + borax (7:3) > boric acid + borax (1:1) > boric acid > borax >Control. The highest residual char content was achieved for the sample impregnated with 4,70% disodium octaborate tetrahydrate among the all treated samples.

Abstract:The perspectives and attitudes of the companies of the forest products industry operating in the fields of solid wood products, pulp, paper and paperboard products, engineered wood products and furniture manufacturing in Turkey on the chain of custody certification system and certified forest products were investigated. Within this scope, face-to-face interviews were conducted with the managers or owners of 177 companies. The data were obtained by using the questionnaire technique. The research methods included descriptive statistics, one-way analysis of variance and the Duncan test. As a result, it was detected that there are differences in the perspectives and attitudes towards the chain of custody certification system of the companies operating in the four main branches of the forest products industry in Turkey. It was revealed by this survey that chain of custody (CoC) certification was known mostly by the companies operating in pulp, paper and paperboard companies. The certification most demanded is the Forest Stewardship Council (FSC) CoC certification, with a share of 15%; and Programme for the Endorsement of Forest Certification (PEFC) CoC is demanded by 2% of companies.