Penggunaan insulasi termal pada hunian dapat menjadi solusi untuk menjaga suhu di dalam ruangan agar kenyamanan dalam bekerja dan beristirahat dapat optimum. Salah satu bahan ramah lingkungan yang dapat digunakan sebagai insulasi termal adalah serat batang pisang (BP) karena nilai konduktivitas termalnya yang rendah, yaitu 0,1166 W/mK, sedangkan matriksnya menggunakan polipropilena (PP). Produksi polipropilena yang tinggi dapat menyebabkan pencemaran lingkungan sehingga polipropilena daur ulang (PPDU) perlu dipelajari untuk dapat dijadikan matriks pada insulasi termal. Penelitian ini menggunakan compression molding pada tekanan 8 MPa dan temperatur 170°C selama 60 menit dengan variasi fraksi volume serat batang pisang sebesar 10%, 30% dan 50% dan variasi jenis matriks, yaitu PP dan PPDU. Kemudian, hasil manfaktur dikarakterisasi menggunakan uji densitas dan uji konduktivitas termal. Hasil pengujian densitas pada BP/PP dan BP/PPDU menurun seiring dengan penambahan fraksi volume berturut-turut. Hal ini dapat terjadi akibat pembentukan void selama proses manufaktur berlangsung. Selain itu, nilai konduktivitas termal masing-masing meningkat dari 0,37 ke 0,89 W/mK untuk BP/PP dan dari 0,58 ke 0,94 W/mK untuk BP/PPDU. Dapat disimpulkan bahwa semakin kecil fraksi volume serat akan menghasilkan nilai konduktivitas termal lebih rendah. Begitu pula dengan penggunaan PP murni yang lebih diminati karena memberikan nilai konduktifitas yang lebih rendah dibanding PPDU.