Strain in epitaxial Si/SiGe graded buffer structures grown on Si(100), Si(110), and Si(111) optically evaluated by polarized Raman spectroscopy and imaging

Abstract

We report on the characterization, thanks to Raman spectroscopy and imaging of tensely strained Si films pseudomorphically grown on (001), (110), and (111) SiGe virtual substrates. The samples studied here are those described in the work of Destefanis et al. [J. Appl. Phys 106, 043508 (2009)]. They consist in 17-nm-thick strained Si layers grown at 650 °C with SiH4 as a gaseous precursor on top of polished SiGe virtual substrates of various surface orientations. We first derived the exact component array of the strain/stress field along the different growth directions. Because the relation between strain or stress and the Raman frequencies are complex, we also derive the strain-shift coefficients for the different substrate orientations considered in this work and the polarization selection rules. Visible and near-UV Raman spectroscopies were used to extract the in-plane lattice parameter of the SiGe virtual substrates and the tensile strain in the thin Si epitaxial layers on top. We have notably investigated thanks to Raman imaging the in-plane distribution of strain in Si layer/SiGe buffer stacks grown on (110) and (111) Si substrates. Original surface arrays have been highlighted for each surface orientation. Promising results have been obtained for (110) SiGe virtual substrates in terms of strain and layer quality while the technological usefulness of the (111) ones is more questionable.

Residual strain around grown‐in defects in CVD diamond single crystals: A 2D and 3D Raman imaging study

“…For a given analysis geometry, any rotation of the crystal or of the incident laser polarization will give rise to intensity changes, see, for example, Ref. 13, and references herein. In Fig.…”

Relation between Raman frequency and triaxial stress in Si for surface and cross-sectional experiments in microelectronics components

“…Using this effect is called "polarized Raman spectroscopy or high-NA polarized Raman spectroscopy." This was, for example, used to study strained Si in different highly stressed samples 27,32,33,[39][40][41] but also near TSVs, 13 assuming correctly triaxial stress and also demonstrating the presence of a nonzero vertical stress component.…”

Lattice strain and tilt mapping in stressed Ge microstructures using X-ray Laue micro-diffraction and rainbow filtering

“…Yet it is mainly limited to the measurement of the Raman spectral shift, which in turn has to be interpreted as a function of the materials, the nature of the strain (Cerdeira et al, 1972;Wolf, 1996) and the light polarization (Mermoux et al, 2010). Absolute in-plane strain can also be revealed semidestructively at micron to millimeter scale using the focused ion beam-digital image correlation technique (Lunt et al, 2015).…”