Optical microlithography on oblique and multiplane surfaces using diffractive phase masks

Abstract

Abstract. Micropatterning on oblique and multiplane surfaces remains a challenge in microelectronics, microelectromechanics, and photonics industries. We describe the use of numerically optimized diffractive phase masks to project microscale patterns onto photoresist-coated oblique and multiplane surfaces. Intriguingly, we were able to pattern a surface at 90 deg to the phase mask, which suggests the potential of our technique to pattern onto surfaces of extreme curvature. Further studies show that mask fabrication error of below 40-nm suffices to conserve pattern fidelity. A resolution of 3 μm and a depth-of-focus of 55 μm are essentially dictated by the design parameters, the mask generation tool, and the exposure system. The presented method can be readily extended for simple and inexpensive three-dimensional micropatterning. © The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Chromatic-aberration-corrected diffractive lenses for ultra-broadband focusing

“…Here, we reiterate that diffractive optics can readily enable broadband focusing, while still maintaining the planar architecture. Previously, we have functionalized diffractive optics as a solar spectrum splitter/concentrator 21 , multi-color encoder 22 , phase masks for 3D lithography 23 and dispersion elements in computational spectroscopy 24 .…”

“…For simplicity, we utilize a positive-tone photoresist, SC1827 deposited on a soda-lime glass substrate as the device material. A commercial grayscale lithography tool was employed to rapidly pattern the device in a single step 21 22 23 24 . The width, Δ is dictated by the resolution of this tool.…”

“…In order to achieve super-achromatic performance, we applied a modified direct-binary-search (DBS) algorithm to optimize the distribution of groove heights, h i 21 22 23 24 27 . It is a perturbation-based iterative method.…”

Multi-plane, multi-band image projection via broadband diffractive optics

“…3 under monochromatic illumination [9]. In fact, we previously demonstrated this inter-changeability in experiments with laser illumination [10]. However, this inter-changeability is not obvious for broadband illumination.…”

Volumetric Additive Manufacturing of Polymer Structures by Holographically Projected Light Fields

“…is significantly worse than lateral resolution This limitation of single-beam projection has been explored, but not overcome, by investigators developing algorithms to holographically define 3D optical fields with arbitrary intensity distributions at multiple axial planes [72,73], or in a 3D volume [49]. In all cases, axial feature spacing is 10-100-fold greater than the in-plane feature spacing.…”