On the relation between surface texture and gloss of injection-molded pigmented plastics

Abstract

The relation between the surface topography of injection‐molded plastic objects with deliberately imposed textures and their gloss, measured by means of a conventional glossmeter at incident angles of 20°, 60°, and 85°, was investigated. A modification of the general scalar Kirchhoff approximation, which accounts for geometrical features of the glossmeter, is used to describe the experimental gloss values of the textured surfaces. The agreement between the measured and the calculated values for incidence angles of 20° and 60° confirms the usefulness of the approach, though several of the textured surfaces used here are too rough for the Kirchhoff theory to be strictly valid. A poorer agreement, however, was noted at higher incidence angles (85° in this case). For very smooth surfaces (without any texture), the classical Bennett‐Porteus theory could in many cases describe the gloss level with sufficient accuracy. The influence on the measured gloss of the polymer material (in terms of its refractive index) and the color of the injection‐molded object is also discussed. Light beige specimens in three different polymeric materials (acrylonitrile‐butadiene‐styrene, acrylonitrile‐butadiene‐styrene/polycarbonate blend, and polypropylene) as well as three acrylonitrile‐butadiene‐styrene products with different colors were used. The refractive index of the polymer had no major influence on the measured gloss. The gloss level increased slightly with increasing lightness of the specimens, which can be associated with an increased contribution from the bulk scattering. However, the surface texture governed most of the gloss variations. POLYM. ENG. SCI., 45:1343–1356, 2005. © 2005 Society of Plastics Engineers

Effect of calendering on paper surface micro-structure: A multi-scale analysis

“…For optically smooth surfaces (e.g., a mirror), the specular reflection can be calculated from Fresnel's theory (Arino et al, 2005):…”

Effect of color, gloss, and surface texture perception on scratch and mar visibility in polymers

“…However, texture is sometimes imposed to disguise some surface damages and manipulate other surface properties. Arino et al found a correlation between gloss and imposed texture on polymeric surfaces [8]. They used the general scalar Kirchhoff approximation and the classical Bennett-Porteus theory.…”

Gloss evaluation and prediction of achromatic low‐gloss textured surfaces from the automotive industry

“…These surfaces may hardly be considered “glossy”, since the manufacturers try to make this gloss value as low as possible for various technical, sensory and marketing reasons. Furthermore, topography (TOPO) has a large impact on the optical response to light of these textured surfaces . The size of the texture (depth and dimension) and its TOPO influence gloss perception.…”

“…Furthermore, topography (TOPO) has a large impact on the optical response to light of these textured surfaces. [4][5][6] The size of the texture (depth and dimension) and its TOPO influence gloss perception. Gloss perception can be described by six different visual phenomena.…”