Numerical Aspects of Data Reconciliation in Industrial Applications

Abstract

Abstract:Data reconciliation is a model-based technique that reduces measurement errors by making use of redundancies in process data. It is largely applied in modern process industries, being commercially available in software tools. Based on industrial applications reported in the literature, we have identified and tested different configuration settings providing a numerical assessment on the performance of several important aspects involved in the solution of nonlinear steady-state data reconciliation that are generally overlooked. The discussed items are comprised of problem formulation, regarding the presence of estimated parameters in the objective function; solution approach when applying nonlinear programming solvers; methods for estimating objective function gradients; initial guess; and optimization algorithm. The study is based on simulations of a rigorous and validated model of a real offshore oil production system. The assessment includes evaluations of solution robustness, constraint violation at convergence, and computational cost. In addition, we propose the use of a global test to detect inconsistencies in the formulation and in the solution of the problem. Results show that different settings have a great impact on the performance of reconciliation procedures, often leading to local solutions. The question of how to satisfactorily solve the data reconciliation problem is discussed so as to obtain improved estimates.

Modeling of Spiral Wound Membranes for Gas Separations—Part II: Data Reconciliation for Online Monitoring

“…As a matter of fact, access to actual data are extremely important for real-time monitoring and optimization of production units [9]. The dynamic monitoring of a plant, unit or industrial equipment is increasingly necessary to improve product quality, enhance process safety, and reduce energy costs and waste; however, the acquired information must be reliable and validated with physical process constraints, as the reliability of the data are of paramount importance for any decision-making related to the analyzed process [10]. Nevertheless, process measurements are subject to errors and fluctuations due to intrinsic imprecision, degradation, malfunction, improper installation, poor calibration, and failure of measurement instruments.…”

An Automatic Monitoring System for High-Frequency Measuring and Real-Time Management of Cyanobacterial Blooms in Urban Water Bodies

“…In general, the water temperature ranges from 21.2 °C to 27.4 °C during 8th August and mid-September, then progressively decreases from 21.2 °C to 12.2 °C until the end of October. The lake is completely stratified during 3 periods from mid-August to mid-September, (12)(13)(14)(15)(16)(17)(18)(19)(20) During the rest of the presented period, a daily stratification cycle can be observed. The subsurface water temperature (0.5 m depth) begins to increase at about 6:00 a.m., achieving the daily maximum at around 16:00 p.m., and then decreases.…”

“…The average ratio of phycocyanin to chlorophyll-a (µg chl-a/L/µg PC/L) is calculated for each phytoplankton bloom period (11)(12)(13)(14)(15)(16)(17)(18)(19) …”

“…Since using invalid or false data can lead to wrong and biased results or interpretations, continuous measurement results must be systematically inspected and validated [17]. The invalid measurements can be mainly identified as (i) biases due to probe calibration; and (ii) sensor deviations linked with occasional local environmental conditions [18].…”

A Retrofit Hierarchical Architecture for Real-Time Optimization and Control Integration

“…SRTO requires several preprocessing steps, such as steady-state detection, data reconciliation, parameter estimation and model adaptation before it can be used. A major improvement can be obtained in the data reconciliation step [18]. Recently, DRTO and EMPC have become more attractive due to their better performance in handling input and output constraints in comparison with SRTO.…”