Mechanistic Study of One-Step Cathodic Electrodeposition of Mixed Cu-In-Ga Oxide/Hydroxide Films with Hydrogen Peroxide Oxygen Precursor

Abstract

Electrodeposition of multicomponent oxide films with semiconducting properties for use in various applications like photovoltaics is of great interest. This paper deals with mixed copper, indium, gallium oxides which can be used as precursors for copper indium gallium diselenide layer in thin film solar cells and potentially p-type transparent oxide layers, in the delafossite family. One-step cathodic electrodeposition of Cu-In-Ga mixed oxide/hydroxide is investigated using hydrogen peroxide as the oxygen source. The deposition mechanism of the Cu-In-Ga oxide layers is studied by cyclic voltammetry and in situ using an electrochemical quartz crystal microbalance. A marked influence of hydrogen peroxide on the Cu(II), In(III) and Ga(III) electrochemical system is evidenced. Hydrogen peroxide enables the incorporation of indium and gallium as oxides/hydroxides at much less negative potentials than the In and Ga metals. A reaction path is proposed which accounts for the main experimental results. The reduction process starts with the reduction of cupric species, which is followed by the reduction of hydrogen peroxide. For peroxide concentrations higher than 20 mM, the precipitation of Ga and In oxides/hydroxides takes place. At more negative potentials the reactions become controlled by mass transfer allowing to control the composition of the films.

Chemical instability at chalcogenide surfaces impacts chalcopyrite devices well beyond the surface

“…3 ) and—thermodynamically speaking—cannot be reverted even under exposure to a static atmosphere of metastable Se 2 molecules generated hypothetically by a cracker effusion cell (black dotted line). Stronger reagents, such as H 2 , are needed to reduce In 2 O 3 40 .…”

Present Status of Solution‐Processing Routes for Cu(In,Ga)(S,Se)2 Solar Cell Absorbers

“…This simplified the process to control and incorporate gallium into the CIGS thin film and device PCEs of 12.4% were achieved. [ 202 ] In early 2018, Londhe et. al.…”

A short review on the advancements in electroplating of CuInGaSe2 thin films

“…The reduction starts with the cupric ion followed by the reduction of H 2 O 2 which facilitates the inclusion of In and Ga in the form of oxides/hydroxides. Precipitations of In and Ga were observed for higher concentration of H 2 O 2 (20 mM) for which the deposition takes place by a controlled mass transfer of the hydroxide species [66].…”