Mechanical Characteristic and Water Absorption Property of Bio Composite from Sago Starch and Jute Fiber (Boehmeria Nivea) as the filler

Abstract

Environmentally friendly plastics can be degraded biologically in an anaerobic environment. This plastic is synthesized from starch such as sago starch which is available in abundance. In the form of bioplastics, its mechanical properties are still not compared to conventional plastics derived from crude oil, so its application is limited. The incorporation of filler material increases its mechanical properties, one of the selected fillers is hemp fiber as used in this study. Thermoplastic starch from sago with flax fiber as a filler and the addition of Polypropylene to improve mechanical properties with a certain composition to maintain its natural biodegradability. The mechanical properties analyzed were tensile strength, elongation and modulus of elasticity. Water absorption tests were also carried out to observe the water resistance properties. The results of the tensile strength test showed that the best tensile strength value of 9.32 Mpa was obtained at the addition of 35% fiber with a TPS: PP ratio of 1:1.5. The same conditions were obtained for the percent elongation with the results of 10.16% and the modulus of elasticity was 91.73 Mpa. Water absorption showed that 55% filler gave the lowest water absorption, namely 4.41% at a ratio of TPS: PP 1:0.5. The addition of fiber filler into the bio-composite affects the tensile strength, elongation and modulus of elasticity, the higher the volume of filler entering the bio-composite, the lower the value of tensile strength, elongation and modulus of elasticity, or vice versa. The ratio of addition of polypropylene matrix is also influential, the higher the ratio contributes to the tensile strength, elongation and higher modulus of elasticity. High water absorption capacity will reduce the performance of biocomposite, so the lower the water absorption ability, the better the quality of the biocomposite product and the wider its application

Natural Fiber-Reinforced Thermoplastic ENR/PVC Composites as Potential Membrane Technology in Industrial Wastewater Treatment: A Review

“…Moreover, the addition of fillers to the polymer matrix is to modify the properties of the base polymer and improves its mechanical properties [48][49][50]. Among the natural fillers that are often used are oil palm empty bunch fiber [51,52], coconut fiber [53,54], jute [55,56], pineapple leaves [57,58], sugar palm fiber [59,60] and rice husk [61][62][63][64].…”