Highly Porous, Rigid-Rod Polyamide Aerogels with Superior Mechanical Properties and Unusually High Thermal Conductivity

Abstract

We report here the fabrication of polyamide aerogels composed of poly-p-phenylene-terephthalamide, the same backbone chemistry as DuPont's Kevlar. The all-para-substituted polymers gel without the use of cross-linker and maintain their shape during processing-an improvement over the meta-substituted cross-linked polyamide aerogels reported previously. Solutions containing calcium chloride (CaCl) and para-phenylenediamine (pPDA) in N-methylpyrrolidinone (NMP) at low temperature are reacted with terephthaloyl chloride (TPC). Polymerization proceeds over the course of 5 min resulting in gelation. Removal of the reaction solvent via solvent exchange followed by extraction with supercritical carbon dioxide provides aerogels with densities ranging from 0.1 to 0.3 g/cm, depending on the concentration of calcium chloride, the formulated number of repeat units, n, and the concentration of polymer in the reaction mixture. These variables were assessed in a statistical experimental study to understand their effects on the properties of the aerogels. Aerogels made using at least 30 wt % CaCl had the best strength when compared to aerogels of similar density. Furthermore, aerogels made using 30 wt % CaCl exhibited the lowest shrinkage when aged at elevated temperatures. Notably, whereas most aerogel materials are highly insulating (thermal conductivities of 10-30 mW/m K), the polyamide aerogels produced here exhibit remarkably high thermal conductivities (50-80 mW/(m K)) at the same densities as other inorganic and polymer aerogels. These high thermal conductivities are attributed to efficient phonon transport by the rigid-rod polymer backbone. In conjunction with their low cost, ease of fabrication with respect to other polymer aerogels, low densities, and high mass-normalized strength and stiffness properties, these aerogels are uniquely valuable for applications such as lightweighting in consumer electronics, automobiles, and aerospace where weight reduction is desirable but trapping of heat may be undesirable-applications where other polymer aerogels have to date otherwise been unsuitable-creating new opportunities for commercialization of aerogels.

Carbon Aerogels for Environmental Clean‐Up

“…Carbon aerogels were firstly prepared by polymerizing resorcinol with formaldehyde (RF) under alkaline conditions, followed with supercritical drying and carbonization . Since then, more and more monomers were used, such as melamine‐formaldehyde (MF),, phenol‐formaldehyde (PF), cresol‐formaldehyde (CF), phenol‐furfural, and some polymers, like polyacrylonitriles,, polystyrenes and polyurethanes . In the last few years, an increasing variety of carbon aerogels have emerged, like graphene aerogels,, , carbon nanotube aerogels,, and biomass aerogels .…”

Synthesis and properties of fluorinated copolymerized polyimide films

“…Polyimides were widely used in aerospace [1] , microelectronics [2] , national defense technology [3] and other fields [4] , due to its excellent thermal stability, mechanical properties, chemical stability and good dielectric properties [5][6][7] . Polyimide is one of the high performance polymers.…”

Superhydrophobic polyimide aerogels via conformal coating strategy with excellent underwater performances

“…Recently, a variety of new aerogels have been synthesized, such as organic polymer‐based aerogels, supramolecular aerogels, hybrid aerogels, and graphene aerogels . Organic polymer‐based aerogels including polyaimide, polyurethane, and cellulose aerogels have attracted increasing interests due to their outstanding mechanical properties. Among them, polyimide (PI) aerogels derived from diamines and dianhydrides show superior mechanical properties compared to their counterparts with the same densities (e.g., Young's modulus over 100 MPa) …”