Extremely Sensitive Microwave Microfluidic Dielectric Sensor Using a Transmission Line Loaded with Shunt LC Resonators

Abstract

In this paper, a very high sensitivity microwave-based planar microfluidic sensor is presented. Sensitivity enhancement is achieved and described theoretically and experimentally by eliminating any extra parasitic capacitance not contributing to the sensing mechanism. The sensor consists of a microstrip transmission line loaded with a series connected shunt LC resonator. A microfluidic channel is attached to the area of the highest electric field concentration. The electric field distribution and, therefore, the resonance characteristics are modified by applying microfluidic dielectric samples to the sensing area. The sensor performance and working principle are described through a circuit model analysis. A device prototype is fabricated, and experimental measurements using water/ethanol and water/methanol solutions are presented for validation of the sensing mathematical model.

Graphene‐Based Enzymatic and Non‐Enzymatic Electrochemical Glucose Sensors: Review of Current Research and Advances in Nanotechnology

“…Electrochemical sensors play an influential role in both medical and environmental diagnostics. These types of sensors work on the principle of electrochemistry and are highly selective because of their rapid response, long term stability, wide range of analytes, and cost effectiveness [14] . Emerging technologies like machine learning and artificial intelligence have further enhanced their environmental and healthcare applications.…”

A metamaterial based microfluidic sensor for permittivity detection of liquid

“…Common solutions include increasing the volume of liquids or using micrometerscaled resonators, which may increase the liquid consumption and fabrication cost though. So, it is challenging to achieve a balance between fabrication cost, liquid consumption, sensitivity and operating frequencies [19][20][21].…”

Measurement of low‐loss aqueous solutions permittivity with high detection accuracy by a contact and free‐label resonance microwave sensor

“…Such structure can achieve the dielectric specifications by using the relationship between the complex permittivity of the samples and the resonance properties. To increase the sensitivity of such structure, a series connected shunt LC resonator 54 or a shunt-connected series LC resonator is used to increase the sensitivity by using a capacitive gap area. 55 The methods of measuring permittivity are different; these methods include waveguide, probe, and planar.…”

“…One of the reasons for the ease of checking the sensor is that only the resonance in one of the scattering parameters is explored to check the sensitivity, and this issue does not involve the researcher in other parameters, especially the phase. The proposed sensor with the features defined for it can be used in the field of biomedical, 56 and microfluidic 57 sensors can create very high sensitivity by creating LC resonators, [53][54][55] and medical industries can use it in these fields.…”