Experimental and numerical investigations on the water vapor adsorption isotherms and kinetics of binderless zeolite 13X

Experimental Investigations of Composite Adsorbent 13X/CaCl2 on an Adsorption Cooling System

“…Tatsidjodoung's [18] study focused on the experimentation of a significant scale prototypes using zeolite 13X/H 2 O as the reactive pair and addressed the thermal performances of a zeolite-based open sorption heat storage system to provide thermal energy for space heating needs. Mette [19] conducted an open sorption process, developing a numerical model of the water vapor adsorption of binderless zeolite 13X beads. Tso [20] studied an adsorption cooling system with a novel composite material (zeolite 13X/CaCl 2 ) as the adsorbent and water as the adsorbate under various working conditions.…”

The Use of Sorption Balance for the Characterization of the Water Retention Curve of Cement-Based Materials

“…Sorption balances have existed for a very long time (McBain and Bakr 1926;Gregg and Wintle 1946;Gregg 1955;Gleeson 1962;Tamburini 1970) however now, there are reliable models available from numerous suppliers (Keller and Robens 2003). They are especially and commonly used in various scientific fields: pharmaceuticals, the food industry or the study of materials (Cazacu et al 2009;Lyn et al 2010;Ayadi and Dole 2011;Maeda et al 2011;Wicklein et al 2011;Argyropoulos et al 2012;Carter and Schmidt 2012;Pei and Zhang 2012;Volkova et al 2012;Zhang et al 2012;Besbes et al 2013;Jung et al 2014;Pons et al 2015;Mette et al 2014;Guicheret-Retel et al 2015;Otoni et al 2016). In these areas it has been proven that the use of sorption balance is able to obtain similar results to other common techniques (Johannesson and Janz 2002;Arlabosse et al 2003;Fei et al 2006).…”

Conventional hydrothermal synthesis of nanoporous molecular sieve 13X for selective adsorption of trace amount of hydrogen sulfide from mixture with propane

“…Some of the synthetic zeolites like 4A, 5A and 13X possess a number of properties that distinguish them from adsorbents of other types in decontaminating process. For instance, adsorption selectivity of polar molecules because of their highly localized polar charges on their surface that act as extremely effective adsorption sites for polar compounds (Mette, et al, 2014), high adsorption capacity at increased M A N U S C R I P T A C C E P T E D ACCEPTED MANUSCRIPT 2 temperatures (up to 100˚С) and low partial pressures of recovered component (Park, et al, 2012;Yu, et al, 2012) and uniform diameters of pore entrances they tend not to adsorb bigger molecules such as the heavy hydrocarbons (Dunne, et al, 1996;Harlick, et al, 2004). Therefore, in comparison to other adsorbents (silicagel, activated charcoal, magnesium silicate, etc.)…”