Evaluation of Structural and Mechanical Properties of Porous Artificial Bone Scaffolds Fabricated via Advanced TBA-Based Freeze-Gel Casting Technique

Abstract

Porous hydroxyapatite (HA) artificial bone scaffolds were prepared via the freeze-gel casting process in order to improve their mechanical strengths. As a porogen, various volumes of poly (methyl methacrylate) (PMMA) powders were added to obtain high porosity, such as in cancellous bone. After fabrication, the porous and mechanical properties of the scaffolds were examined. The HA60 scaffold, with a porosity over 80%, had proper compressive strength and modulus and satisfied the range of properties of cancellous bone. Moreover, it was found that the investigated mechanical properties were affected by the scaffolds’ porosity. However, a section was found where the compressive strength was high despite the increase in the porosity. Specifically, HA30 had a porosity of 62.9% and a compressive strength of 1.73 MPa, whereas the values for HA60 were 81.9% and 3.23 MPa, respectively. The results indicate that there are factors that can preserve the mechanical properties even if the porosity of the scaffold increases. Therefore, in this study, various parameters affecting the porous and mechanical properties of the scaffolds during the manufacturing process were analyzed. It is expected that the improvement in the mechanical properties of the artificial bone scaffold having a high porosity can be applied to tissue engineering.

Bioengineered 3D nanocomposite based on gold nanoparticles and gelatin nanofibers for bone regeneration: in vitro and in vivo study

“…The porosity of cancellous (or spongy) bone is in the range of 30–90%, and a tissue engineering scaffold must be matched with its porous structure 28 , 29 . It is known that the proper vascularization and the subsequent osteogenesis take place in the macroporous scaffolds 30 , 31 .…”

Properties of scaffolds based on chitosan and collagen with bioglass 45S5

“…Tannic acid improves the mechanical properties of scaffolds because it contains hydroxyl groups which are able to form hydrogen interactions with amine groups from biopolymers. The addition of inorganic particles improves the mechanical properties of scaffolds as ceramics have high compressive modulus and maximum compressive strength parameters [15–17]. Their presence on the scaffolds surface forms the support for a flexible matrix.…”

Study of Mechanical and Thermal Properties in Nano-Hydroxyapatite/Chitosan/Carboxymethyl Cellulose Nanocomposite-Based Scaffold for Bone Tissue Engineering: The Roles of Carboxymethyl Cellulose

“…Therefore, the scaffold should be biodegradable, biocompatible, and osteoconductive [3]. The scaffold should have a porosity of about 30-90% [4], with minimal pore sizes of 100 µm to serve 2 of 11 as a template for bone cell regeneration and growth [5]. Apart from scaffold, the microenvironment, such as extracellular matrix or the employed cells, also plays an important role in the regenerative processes.…”