Environmental Stability of Polymer Tantalum Capacitors

Abstract

Stability of Polymer Tantalum capacitors with pre-polymerized PEDOT (slurry PEDOT) cathodes were investigated under different environmental conditions. Capacitance dependence on temperature, frequency, and dc bias voltage were investigated in humid and dry capacitors with different dielectric thicknesses. Electrical measurements and scanning electron microscopy (SEM) were used to characterize the capacitors. Humid capacitors were observed to have higher capacitance than dry capacitors for all dielectric thicknesses. The capacitance for all dielectric thicknesses was observed to increase with temperature in both humid and dry capacitors. Humid capacitors showed a strong temperature dependence at lower temperatures while dry capacitors showed a strong temperature dependence at higher temperatures. These temperature effects were more pronounced in thinner dielectric capacitors, and the results were explained by the integrity of the dielectric-polymer interface. The capacitance for all dielectric thicknesses was also observed to decrease with an increase in frequency, both in humid and dry capacitors. The frequency effect was more pronounced in humid capacitors with thinner dielectrics. These results were explained by a distributed capacitance model, secondary transitions of the polar segments of the polymer cathode, and lower reactance and lower self-resonance frequency of the thinner dielectric capacitors. The technological principles of improving environmental stability of Polymer Tantalum capacitors are also discussed.

Optimización de materia prima en la industria de capacitores

“…De acuerdo con Qazi (2014) los ¨modos de falla eléctrica de los capacitores de tantalio se pueden dividir en tres grandes categorías: alta fuga de corriente y cortos, alta resistencia en serie (ESR), y CAP alto o bajo, que representa la mayoría de las fallas¨. Tarekegn (et al, 2020) observan ¨que la presencia de humedad también provoca pérdida de capacitancia y aumento de fuga de corriente (DCL) durante pruebas a largo plazo en temperaturas elevadas¨. (Freeman et al, 2017) observa que la mejora continua en los capacitores de tantalio polimérico ¨permiten que se usen no sólo en electrónica comercial, sino también en la electrónica especial de alta fiabilidad como la militar y la espacial.…”