Effect of pro‐oxidants on biodegradation of polyethylene (LDPE) by indigenous fungal isolate, Aspergillus oryzae

Abstract

Proxidant additives represent a promising solution to the problem of the environment contamination with polyethylene film litter. Pro-oxidants accelerate photo-and thermo-oxidation and consequent polymer chain cleavage rendering the product apparently more susceptible to biodegradation. In the present study, fungal strain, Aspergillus oryzae isolated from HDPE film (buried in soil for 3 months) utilized abiotically treated polyethylene (LDPE) as a sole carbon source and degraded it. Treatment with pro-oxidant, manganese stearate followed by UV irradiation and incubation with A. oryzae resulted in maximum decrease in percentage of elongation and tensile strength by 62 and 51%, respectively, compared with other pro-oxidant treated LDPE films which showed 45% (titanium stearate), 40% (iron stearate), and 39% (cobalt stearate) decrease in tensile strength. Fourier transform infrared (FTIR) analysis of proxidant treated LDPE films revealed generation of more number of carbonyl and carboxylic groups (1630-1840 cm À1 and 1220-1340 cm À1) compared with UV treated film. When these films were incubated with A. oryzae for 3 months complete degradation of carbonyl and carboxylic groups was achieved. Scanning electron microscopy of untreated and treated LDPE films also revealed that polymer has undergone degradation after abiotic and biotic treatments. This concludes proxidant treatment before UV irradiation accelerated photo-oxidation of LDPE, caused functional groups to be generated in the polyethylene film and this resulted in biodegradation due to the consumption of carbonyl and carboxylic groups by A. oryzae which was evident by reduction in carbonyl peaks. Among the pro-oxidants, manganese stearate treatment caused maximum degradation of polyethylene. V C 2011 Wiley Periodicals, Inc. J Appl Polym Sci 120: [3536][3537][3538][3539][3540][3541][3542][3543][3544][3545] 2011

Behavior in simulated soil of recycled expanded polystyrene/waste cotton composites

“…Chain scissions may occur due to oxidation by dissolved oxygen in the soil. The carbonyl index decreases after longer exposures, which could be due to the consumption of the carbonyl groups by microorganisms and/or the formation of esters or the occurrence of the Norrish mechanism 32,33 . The presence of carbonyl groups, such as esters, carboxylic acids, aldehydes and ketones, in a degraded polymer may indicate oxidation and that the material is more vulnerable to degradation 34 .…”

Potential of fungi isolated from the dumping sites mangrove rhizosphere soil to degrade polythene

“…Our results are in agreement with the previous studies, previously, after 10 days of incubation maximum reduction (60%) in tensile strength (TS) of the heat treated polythene was reported with Mucor rouxii [NRRL 1835] 73 . After three months of testing period maximum reduction in TS (63%) of the polythene was reported with A. oryzae 58 followed by 51% reduction in PE (Mangnease sterate treated LDPE exposed to UV irradiation) with the same fungi ( A. oryzae ) 74 . Vijaya and Reddy 52 followed the ASTM standard and assessed the degradation (by compositing) of polythene (HDPE) along with municipality solid waste and recorded highest 20% reduction in tensile of HDPE after 1 year of testing duration.…”

Blends of high density polyethylene and poly(l‐lactic acid): Mechanical and thermal properties

“…One of the solutions for these problems is recycling, but it is very costly and moreover, the recycled products have poorer qualities . Natural degradation of these plastics within short and specified life span is one of the alternatives to deal with such issues and becomes the demand of the situation . From last two decades, an increase in the investigations concerning total or partial substitution of synthetic plastics by biodegradable materials, viz.…”