Effect of Al 6061 Alloy Compositions on Mechanical Properties of the Automotive Steering Knuckle Made by Novel Casting Process

Abstract

This study demonstrates the feasibility of a novel casting process called tailored additive casting (TAC). The TAC process involves injecting the melt several times to fabricate a single component, with a few seconds of holding between successive injections. Using TAC, we can successfully produce commercial-grade automotive steering knuckles with a tensile strength of 383 ± 3 MPa and an elongation percentage of 10.7 ± 1.1%, from Al 6061 alloys. To produce steering knuckles with sufficient mechanical strength, the composition of an Al 6061 alloy is optimized with the addition of Zr, Zn, and Cu as minor elements. These minor elements influence the thermal properties of the melt and alloy, such as their thermal stress, strain rate, shrinkage volume, and porosity. Optimal conditions for heat treatment before and after forging further improve the mechanical strength of the steering knuckles produced by TAC followed by forging.

Improving the Tribological Performance of MAO Coatings by Using a Stable Sol Electrolyte Mixed with Cellulose Additive

“…The friction coefficient was recorded on a computer during each test. The wear loss was weighed using an electronic balance, and the wear rate (k) was calculated according to the following Formula (1).…”

“…Aluminum alloys are characterized by their excellent castability, high specific strength and low thermal expansion coefficient [1]. As a result, they have aroused increasing interest in the automobile industry, as well as having aerospace structural and military applications [2][3][4].…”

Processing–Structure–Property Relationships in Metals

“…The book gathers manuscripts from academic and industrial researchers with stimulating new ideas and original results. It consists of one review paper regarding state of art and perspectives of alloys for aeronautic applications [1] and fifteen research papers [2][3][4][5][6][7][8][9][10][11][12][13][14][15][16] focused on different materials and processes.…”

“…The feasibility of a novel casting process, tailored additive casting (TAC), has been demonstrated in [13]. In this process, the melt is injected several times to fabricate a single component, with a few seconds of holding between successive injections.…”

Metal Posts and the Effect of Material–Shape Combination on the Mechanical Behavior of Endodontically Treated Anterior Teeth

“…With regard to industrial metal manufacturing, the relationship among process parameters, microstructure, and mechanical properties is of great interest in different areas (e.g., casting, plastic forming, sintering, and welding), and also involves traditional and innovative processes [1][2][3].…”