2013
DOI: 10.1080/14786451.2013.821125
|View full text |Cite
|
Sign up to set email alerts
|

Dynamic and thermal study of air flow control by chicanes with inclined upper parts in solar air collectors

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
2
1
1
1

Citation Types

1
6
0

Year Published

2015
2015
2024
2024

Publication Types

Select...
6

Relationship

3
3

Authors

Journals

citations
Cited by 6 publications
(7 citation statements)
references
References 20 publications
1
6
0
Order By: Relevance
“…For mass flow rate of 0.035 kg/s, it is observed that the air temperature increasing along the air stream dynamics length with a mean of (316.3 K) in the smooth case and with an average of (324.3 K, 329.5 K, 330.7 K and 332.1 K) in the case (without inclined part, 0°, 45° and 60°) with a rise of (2.52%, 4.17%, 4.55% and 4.99%)respectively. This is due to the secondary flow when it is trapped between two chicanes and the main flow where powered with a brewing phenomenon which provokes a heat transfer from the hot flow to the cold one, therefore the chicanes provide a delaying aspect for more and more time to the heat transfer process which is confirmed by Moummi et al [4][5][6][7][8][9][10][11][12][13]. …”
Section: Reynolds Number Effect On the Heat Transfer Coefficientsupporting
confidence: 53%
See 1 more Smart Citation
“…For mass flow rate of 0.035 kg/s, it is observed that the air temperature increasing along the air stream dynamics length with a mean of (316.3 K) in the smooth case and with an average of (324.3 K, 329.5 K, 330.7 K and 332.1 K) in the case (without inclined part, 0°, 45° and 60°) with a rise of (2.52%, 4.17%, 4.55% and 4.99%)respectively. This is due to the secondary flow when it is trapped between two chicanes and the main flow where powered with a brewing phenomenon which provokes a heat transfer from the hot flow to the cold one, therefore the chicanes provide a delaying aspect for more and more time to the heat transfer process which is confirmed by Moummi et al [4][5][6][7][8][9][10][11][12][13]. …”
Section: Reynolds Number Effect On the Heat Transfer Coefficientsupporting
confidence: 53%
“…In Fluent, the Standard − model is the most widely used because of its robustness and is therefore valid only for fully turbulent flows, precision and relatively its low cost in computation time. This model is an example of two-equation models; turbulent kinetic energy and dissipation rate are obtained from the following equations, Mahfoud et al [10].…”
Section: Mathematical Modellingmentioning
confidence: 99%
“…The geometrical characteristics such as length, width, spacing between the ribs are chosen based on the study carried out by Mahfoud et al [12]. The main geometrical features of the tested model are summarized in Table 1.…”
Section: Geometry Parameters and Motion Modelingmentioning
confidence: 99%
“…The simulation is one way to predict the heat transfer. The convective heat transfer and fluid flow over a backward facing step have been widely investigated both numerically [6]- [11] and experimentally [12]. Numerous recent studies for different types of fluids materials have been undertaken [13]- [16], in different forms of ducts [17]- [19].…”
Section: Introductionmentioning
confidence: 99%