Design, Fabrication and Characterization of a Low-Impedance 3D Electrode Array System for Neuro-Electrophysiology

Abstract

Recent progress in patterned microelectrode manufacturing technology and microfluidics has opened the way to a large variety of cellular and molecular biosensor-based applications. In this extremely diverse and rapidly expanding landscape, silicon-based technologies occupy a special position, given their statute of mature, consolidated, and highly accessible areas of development. Within the present work we report microfabrication procedures and workflows for 3D patterned gold-plated microelectrode arrays (MEA) of different shapes (pyramidal, conical and high aspect ratio), and we provide a detailed characterization of their physical features during all the fabrication steps to have in the end a reliable technology. Moreover, the electrical performances of MEA silicon chips mounted on standardized connector boards via ultrasound wire-bonding have been tested using non-destructive electrochemical methods: linear sweep and cyclic voltammetry, impedance spectroscopy. Further, an experimental recording chamber package suitable for in vitro electrophysiology experiments has been realized using custom-design electronics for electrical stimulus delivery and local field potential recording, included in a complete electrophysiology setup, and the experimental structures have been tested on newborn rat hippocampal slices, yielding similar performance compared to commercially available MEA equipments.

Electrical Characterization of 3D Au Microelectrodes for Use in Retinal Prostheses

“…We have presented results on the fabrication [ 10 , 11 ], long-term biostability [ 12 ], and enhanced electrical/mechanical characteristics [ 12 , 13 ] of such devices. Other researchers have also reported results on 3D electrode technology [ 14 ].…”

Large charge-storage-capacity iridium/ruthenium oxide coatings as promising material for neural stimulating electrodes

“…Fig. 5(b) is an example of analysis applied to the Ir 0.8 eRu 0.2 -oxide coating [56,69,70]. The corresponding current vs. scan dependence shows good linearity (Fig.…”

Carbon Nanotube Modified Microelectrode Array for Neural Interface

“…Electrochemical impedance spectroscopy (EIS) is a non-destructive electrochemical method commonly used to characterize the electrode’s surface properties as a measurement of the system’s response to alternating current ( Lust et al, 2003 ; Abidian and Martin, 2008 ; Kusko et al, 2012 ; Vafaiee et al, 2019 ). The most important feature of the array electrodes for the signal recording application is the electrode impedance, which is effective in recording signals with greater accuracy and lower noise levels.…”