Computational analysis of hygromorphic self-shaping wood gridshell structures

Abstract

Bi-layered composites capable of self-shaping are of increasing relevance to science and engineering. They can be made out of anisotropic materials that are responsive to changes in a state variable, e.g. wood, which swells and shrinks by changes in moisture. When extensive bending is desired, such bilayers are usually designed as cross-ply structures. However, the nature of cross-ply laminates tends to prevent changes of the Gaussian curvature so that a plate-like geometry of the composite will be partly restricted from shaping. Therefore, an effective approach for maximizing bending is to keep the composite in a narrow strip configuration so that Gaussian curvature can remain constant during shaping. This represents a fundamental limitation for many applications where self-shaped double-curved structures could be beneficial, e.g. in timber architecture. In this study, we propose to achieve double-curvature by gridshell configurations of narrow self-shaping wood bilayer strips. Using numerical mechanical simulations, we investigate a parametric phase-space of shaping. Our results show that double curvature can be achieved and that the change in Gaussian curvature is dependent on the system’s geometry. Furthermore, we discuss a novel architectural application potential in the form of self-erecting timber gridshells.

Multiscale Heterogeneous Polymer Composites for High Stiffness 4D Printed Electrically Controllable Multifunctional Structures

“…This larger opening angle was selected to maximize Gaussian curvature, which provides an enhanced mechanical advantage by achieving higher stiffness compared to planar structures. [ 59,60 ] The lattices possess four electrically isolated conductive quadrants, which allow individual control of each section of the morphing surface. To improve the actuation stroke, we add simple bilayers to each corner of the lattice, referred to here as “legs.” These legs function to lift and support the lattice body and can be individually actuated.…”

3D Printed Responsive Wood Interfaces: Shape-Changing Origami-Inspired Prototypes

“…The final exploration consists of weaving-inspired prototypes, of which one example is shown in Figure 1-C. A recent study by Grönquist et al (2020) developed a similar approach to obtain double-curved surfaces by relying on the hygromorphic properties of wood. The study proposes the use of narrow wood-strip bilayers that selfshape into a grid shell structure.…”

Wood Warping Composite by 3D Printing

“…Plants have no muscles or skeletons and rely on differential growth to achieve shape changes [8,9]. Moreover, when a plant dries and shriveled due to water evaporation, which reduces its volume, cell wall constraints dictate the features of the resulting deformation [10,11]. These constraints may take a functional role of movement, for spreading seeds or digging in the sand for germination (Figure 1b).…”